Tim is definatley the hook-up! No sense even trying someone else, unless you know a VW guru that works for free!
Tim is one of the few people who gives you better work for less money.
Larry
| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| help building motor http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=2&t=1223 |
Page 1 of 1 |
| Author: | tanner2803 [ Tue Sep 18, 2007 3:46 pm ] |
| Post subject: | help building motor |
im new to the vw motor building and all but iv been racing adn building motorcross motors 250 adn 450 4stroke so i have a prety good idea on what im doing but what i need help is i need somone to give me some type of guid line on a parts list or somthin any help is greatyl apreciated and i have full acess to a machine shop if i need it im wanting to buil somthing about 110 to 150 hp or so somthing near that range and run it off pump gas and still be relible as posible thanks for any help |
|
| Author: | sharpshooter [ Tue Sep 18, 2007 3:56 pm ] |
| Post subject: | |
Call Tim Deaton at southern buggys london ky. he has all the parts you need at very reasonable prices he can also answer your technical questions as well # 606-864-2217 |
|
| Author: | wildwillie [ Tue Sep 18, 2007 9:54 pm ] |
| Post subject: | |
i have a 05 honda 450r 4 wheeler i need some help with let me know and im also good frends with tim at the bug shop ! |
|
| Author: | kybuggy1 [ Tue Sep 18, 2007 9:57 pm ] |
| Post subject: | |
Tim is definatley the hook-up! No sense even trying someone else, unless you know a VW guru that works for free!
Tim is one of the few people who gives you better work for less money. Larry |
|
| Author: | 360sst [ Tue Sep 18, 2007 10:22 pm ] |
| Post subject: | |
you guys could have give me some helpfull info like this when i needed my motor worked on i thought he was high but i never got no prices i know he cheap on seats |
|
| Author: | Roy [ Wed Sep 19, 2007 6:43 am ] |
| Post subject: | Re: help building motor |
[quote='tanner2803']im new to the vw motor building and all but iv been racing adn building motorcross motors 250 adn 450 4stroke so i have a prety good idea on what im doing but what i need help is i need somone to give me some type of guid line on a parts list or somthin any help is greatyl apreciated and i have full acess to a machine shop if i need it im wanting to buil somthing about 110 to 150 hp or so somthing near that range and run it off pump gas and still be relible as posible |
|
| Author: | kybuggy1 [ Wed Sep 19, 2007 7:51 am ] |
| Post subject: | |
[quote='360sst']you guys could have give me some helpfull info like this when i needed my motor worked on i thought he was high but i never got no prices i know he cheap on seats[/quote] What made you think he was high? From your posts, I thought you wanted to do it yourself, super low buck. He's cheap, but not free! Larry |
|
| Author: | turboblue [ Wed Sep 19, 2007 4:17 pm ] |
| Post subject: | |
[quote='360sst']you guys could have give me some helpfull info like this when i needed my motor worked on i thought he was high but i never got no prices i know he cheap on seats[/quote] High is a relative term. How can you say he was high if you didn't get prices? If he is like me, he won't trade dollars with no one...... 
Wearing that seat belt yet?? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|