jessielee wrote:
does it hurt the tire if you snib the corsd some, i messed up and cut about a quarter inch of the cords
im sure its not good for em but dont worry i made the same mistake twice on mine
but i havent had any trouble yet
| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| i found some new v treads http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=2&t=10425 |
Page 1 of 1 |
| Author: | jessielee [ Wed Oct 06, 2010 9:01 pm ] |
| Post subject: | i found some new v treads |
i bought a set of new v treads for 300 dollars and the name on the tire says ngk im grooving the so i can get ready for d&k daes anyone know it this is a good tire or not? |
|
| Author: | bmoore [ Wed Oct 06, 2010 9:15 pm ] |
| Post subject: | Re: i found some new v treads |
are they 23 deg? and what ply? |
|
| Author: | jessielee [ Wed Oct 06, 2010 9:46 pm ] |
| Post subject: | Re: i found some new v treads |
there 8 ply and idk if their 23 degree but they are a really soft tire |
|
| Author: | ridenrace6 [ Thu Oct 07, 2010 12:34 am ] |
| Post subject: | Re: i found some new v treads |
more info please, like where to buy, cost, etc........ |
|
| Author: | madskills [ Thu Oct 07, 2010 10:40 am ] |
| Post subject: | Re: i found some new v treads |
Please let me know where to get some? |
|
| Author: | jessielee [ Thu Oct 07, 2010 8:27 pm ] |
| Post subject: | Re: i found some new v treads |
i bought them last week for 300 new and ill get the number of that place i got them at when i grove those tires do i need to cut all the way to the wires or leave some rubber over the wires |
|
| Author: | bmoore [ Thu Oct 07, 2010 8:34 pm ] |
| Post subject: | Re: i found some new v treads |
ask koko!!!! i cut my 8 plys all the way to the cords though, and it made a huge diff |
|
| Author: | jessielee [ Thu Oct 07, 2010 8:40 pm ] |
| Post subject: | Re: i found some new v treads |
does it hurt the tire if you snib the corsd some, i messed up and cut about a quarter inch of the cords |
|
| Author: | bmoore [ Thu Oct 07, 2010 8:51 pm ] |
| Post subject: | Re: i found some new v treads |
jessielee wrote: does it hurt the tire if you snib the corsd some, i messed up and cut about a quarter inch of the cords im sure its not good for em but dont worry i made the same mistake twice on mine but i havent had any trouble yet
|
|
| Author: | bmoore [ Thu Oct 07, 2010 8:53 pm ] |
| Post subject: | Re: i found some new v treads |
good luck, i had 16 hours in cutting my set |
|
| Author: | jessielee [ Thu Oct 07, 2010 9:09 pm ] |
| Post subject: | Re: i found some new v treads |
did u use a little blade or something, i goin to get a3/4 blade to cut mine with |
|
| Author: | bmoore [ Thu Oct 07, 2010 9:21 pm ] |
| Post subject: | Re: i found some new v treads |
jessielee wrote: did u use a little blade or something, i goin to get a3/4 blade to cut mine with i started with a 1/4 and went to a half, i tried the 3/4 but it was a bit$$ to push so i stuck with the half inch |
|
| Author: | cmoultrie [ Thu Oct 07, 2010 11:42 pm ] |
| Post subject: | Re: i found some new v treads |
Heat the rubber with a hand torch before you cut it. also turn the blade around backwards so you can pull it. so much easier than pushing |
|
| Author: | Odyknuck [ Fri Oct 08, 2010 10:37 am ] |
| Post subject: | Re: i found some new v treads |
cmoultrie wrote: Heat the rubber with a hand torch before you cut it. also turn the blade around backwards so you can pull it. so much easier than pushing Hmm! never thought about pulling the blade. Might be less chance of cutting the chords that way. Gonna try it on my spare set of Boggers. |
|
| Author: | Firebug [ Fri Oct 08, 2010 4:43 pm ] |
| Post subject: | Re: i found some new v treads |
still need some pics of these,,,take a pic with your phone and forward to 256-656-5333 |
|
| Author: | cmoultrie [ Fri Oct 08, 2010 5:35 pm ] |
| Post subject: | Re: i found some new v treads |
Odyknuck wrote: cmoultrie wrote: Heat the rubber with a hand torch before you cut it. also turn the blade around backwards so you can pull it. so much easier than pushing Hmm! never thought about pulling the blade. Might be less chance of cutting the chords that way. Gonna try it on my spare set of Boggers. Make your start of the pull slowly go till you feel it touch cords. then ease up a little and go. that will make it a ton faster.... |
|
| Author: | ridenrace6 [ Sat Oct 09, 2010 2:04 am ] |
| Post subject: | Re: i found some new v treads |
still not enough info  ive hunted ngk tires, ngk flotation tire, ngk bar tread, and ngk v tread and have had nothing ngk come up but spark plugs 
|
|
| Author: | chris38375 [ Sat Oct 09, 2010 10:09 am ] |
| Post subject: | Re: i found some new v treads |
ridenrace6 wrote: still not enough info ive hunted ngk tires, ngk flotation tire, ngk bar tread, and ngk v tread and have had nothing ngk come up but spark plugs whatever they are there not gonna be a firestone tire,dont waste your money on anything else u wont be happy,denman ditch witch was about 120 a pcs,but they stil suck even if they are cheap |
|
| Author: | jessielee [ Sat Oct 09, 2010 1:30 pm ] |
| Post subject: | Re: i found some new v treads |
thae name on the tire is bkt, idk what i was thinking when i said ngk and ill get pictures on here as soon as i can |
|
| Author: | afterburnt [ Sat Oct 09, 2010 5:08 pm ] |
| Post subject: | Re: i found some new v treads |
i think these are the tires hes talking about http://www.bkt-tires.com/SearchDetailTy ... ssPly/Bias |
|
| Author: | jessielee [ Sat Oct 09, 2010 8:12 pm ] |
| Post subject: | Re: i found some new v treads |
yea thats them |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|