WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
electric oil pressure gage (harbor freight ) http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=18&t=9637 |
Page 1 of 1 |
Author: | giveitagallon [ Sun Jun 06, 2010 8:01 am ] |
Post subject: | electric oil pressure gage (harbor freight ) |
went to buy a guage and sender from the buggy shop but they were out so i made my way to harbor freight to get some misc tools and noticed they had the electric oil pressure gauges their with the sending unit and i figured what the heck ill give it a try for $25.00 that was half the cost at the buggy shop ! the unit installed has a accurate reading as the mechanical gauge so i have ran it last year and this year with no problems . the gauge lumination can be change with a push of a button . just want to let anyone out their know there a good buy in my opinion for $ 25.00 might be hit or miss but i have had good luck so far with this product thanks jason |
Author: | RNASAH [ Fri Oct 22, 2010 11:55 am ] |
Post subject: | Re: electric oil pressure gage (harbor freight ) |
Did you have to get a metric adapter fitting to make it screw in, or are the threads 10mm? |
Author: | RaceBugg1098 [ Fri Oct 22, 2010 1:55 pm ] |
Post subject: | Re: electric oil pressure gage (harbor freight ) |
You can just retap the block for 1/8 pipe, or use a hammer |
Author: | gasman [ Fri Oct 22, 2010 4:23 pm ] |
Post subject: | Re: electric oil pressure gage (harbor freight ) |
RaceBugg1098 wrote: You can just retap the block for 1/8 pipe, or use a hammer i love it when it comes to the point of needing a bigger hammer .i have also ran these gauges and they are a good gauge to me so far.chad |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |