| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| Best starter? what years? http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=18&t=8734 |
Page 1 of 1 |
| Author: | tw9294 [ Sun Feb 14, 2010 2:47 pm ] |
| Post subject: | Best starter? what years? |
Looking for opinions on the best starters available,what they cost and where to buy? 091 trans is what i will need it for. Thanks |
|
| Author: | Firebug [ Sun Feb 14, 2010 3:13 pm ] |
| Post subject: | Re: Best starter? |
My personal experience is to use a 3 rib bell or have your 091 milled to accept a late model Beetle diesel for automatic,, you will need to modify the bolt holes on the starter a little. Make sure the starter has 9 teeth. I bought this one on ebay. It whizzes my 6 banger like crazy. http://cgi.ebay.com/ebaymotors/ws/eBayI ... MEWAX%3AIT |
|
| Author: | tw9294 [ Fri Mar 26, 2010 8:25 am ] |
| Post subject: | Re: Best starter? what years? |
I have a side shift 6 rib with an older 091 bellhousing. What years were the 091 pre water cooled busses? When lookink at startes at the parts store what should i be looking up? Thanks. |
|
| Author: | pipedope [ Fri Mar 26, 2010 11:23 am ] |
| Post subject: | Re: Best starter? what years? |
As bug said you need to mill 3/8 off the face where the starter bolts on then you can run a car starter or a automatic starter or a high torque 1. the reason for running a 3 or 5 rib bell houseing is that if you break yours you can pick another one up about anywhere or a 3/8milled 6 rib. |
|
| Author: | tw9294 [ Fri Mar 26, 2010 1:52 pm ] |
| Post subject: | Re: Best starter? what years? |
my cars together and i'm not taking it back apart to mill bellhousing. what years do i need tro ask for? Thanks again. |
|
| Author: | ImmortalSoul219 [ Fri Mar 26, 2010 7:36 pm ] |
| Post subject: | Re: Best starter? what years? |
can you just mill 3/8 off the starter face? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|