does anyone have suggestions for cleaning and keeping wire terminals clean and dry? the only exposed wiring i have is on my coil, choke, idle cutoff, and starter jumper. non-ox only makes dirt stick. what about silicone?

Liquid electrical tape. drys to a plyable state.

_________________
Water cooled Dry Sumped Subaru Powered Turbo Charged Fuel Injected 2500CC Tank. Oh Rah! He who dies with the most Toys not only wins, He also wears them out!

Agreed, works real good. If you can't find it try Dip-it.
If your talking about RTV silicone I understand the chemicals in it attacks the metal in the solderless connector corroding it from the inside out.

_________________
Of all the things I've lost, I miss my mind the most.
M
A
G
A

does the liquid tape "glue" the terminals on, or can you remove them without too much trouble?

anyone?
how tough is it to remove terminals once this stuff is on there?

No it does not glue them on. Its only a coating over the terminal. Sorry to get back to you so late.

_________________
Water cooled Dry Sumped Subaru Powered Turbo Charged Fuel Injected 2500CC Tank. Oh Rah! He who dies with the most Toys not only wins, He also wears them out!

thanks,
i-ll give it a try