WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
2.0 ford pinto with point dizzy http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=18&t=17736 |
Page 1 of 1 |
Author: | jasona [ Mon Apr 06, 2015 11:13 pm ] |
Post subject: | 2.0 ford pinto with point dizzy |
i need help on wiring this motor. it has a four pin ignition box. any help would b greatly appreciated. |
Author: | Red Barron [ Tue Apr 07, 2015 6:55 am ] |
Post subject: | Re: 2.0 ford pinto with point dizzy |
Anchor chain and rope would be a good start Sent from my iPhone using Tapatalk |
Author: | Rick [ Tue Apr 07, 2015 7:28 am ] |
Post subject: | Re: 2.0 ford pinto with point dizzy |
Red Barron wrote: Anchor chain and rope would be a good start Sent from my iPhone using Tapatalk Nice way to treat a new member.. |
Author: | bige70chevy [ Tue Apr 07, 2015 3:44 pm ] |
Post subject: | Re: 2.0 ford pinto with point dizzy |
maybe look up ford pinto wiring diagram...just saw a couple cats running them at dtor 2 weeks ago. |
Author: | Huey [ Tue Apr 07, 2015 7:19 pm ] |
Post subject: | Re: 2.0 ford pinto with point dizzy |
The ford pickup coil will work with a GM HEI 4 pin module. http://www.hotrod.com/how-to/engine/1311-convert-a-ford-or-chrysler-ignition-to-gm-hei/ |
Author: | Red Barron [ Tue Apr 07, 2015 10:51 pm ] |
Post subject: | Re: 2.0 ford pinto with point dizzy |
If I offended the new guy I apologize, I have an opinion and I share it perhaps to freely. If you're not spending a lot of cubic dollars a Ford 2.0 will work but $$$/ lbs they are worth more for scrap. Heavy and under powered. But again if your just starting out its better than foot power Sent from my iPad using Tapatalk |
Author: | jasona [ Tue Apr 07, 2015 10:56 pm ] |
Post subject: | Re: 2.0 ford pinto with point dizzy |
thanks guys and especially huey. my motor came with a four wire module. it has 4 letters on 4 terminals but doesnt match letters on gm module. it is basically just a square chroam box with 4terminals in a row. any ideas? |
Author: | jasona [ Tue Apr 07, 2015 11:08 pm ] |
Post subject: | Re: 2.0 ford pinto with point dizzy |
to red barron . no worries man. we all have our opinions and are free to voice them. hell until recently i would run nothing but vw and swore id never run anything else now here i am with a german designed ford motor. lol. right now i have about 600 in this new buggy. 400 for roller and 200 for motor. adapter clutch transaxel and radiator. ill post pics when i get it together. |
Author: | diamonddav [ Tue Apr 07, 2015 11:26 pm ] |
Post subject: | Re: 2.0 ford pinto with point dizzy |
don't worry about red anchor he just needs some air cooled love |
Author: | jimp [ Wed Apr 08, 2015 5:48 am ] |
Post subject: | Re: 2.0 ford pinto with point dizzy |
Can you post some pictures of everything? Close up and distant preferred. http://www.ford-trucks.com/forums/attac ... 1261402879 http://repairguide.autozone.com/znetrgs ... 211ff9.gif |
Author: | Sandbar Norm [ Wed Apr 08, 2015 6:14 pm ] |
Post subject: | Re: 2.0 ford pinto with point dizzy |
Hi Jasone, Where are you located? I can't help with your running. I do have some parts that I would like to get rid of for a 2.0 pinto. I have a rebuild kit, piston, rods, rings, bearings, crank and misc. stuff. (I think its .030 over) Also a 2 into 4 intake. All cheep, like you pay the shipping plus $20. and its yours. (Storage Fee ) I think I've had it since 1980 and its been taking up room for to long. Norm |
Author: | jasona [ Wed Apr 08, 2015 10:33 pm ] |
Post subject: | Re: 2.0 ford pinto with point dizzy |
hi norm. im from oak hill ohio and i would b very interested in the parts. i tried to post some pics but says they are to big. thanks for all the input guys. |
Author: | Sandbar Norm [ Thu Apr 09, 2015 2:04 pm ] |
Post subject: | Re: 2.0 ford pinto with point dizzy |
Jasona, PM me your phone number so we can talk. Norm |
Author: | Bkjones [ Thu Apr 09, 2015 7:14 pm ] |
Post subject: | Re: 2.0 ford pinto with point dizzy |
I have an old eslinger intake with 4 mikuni 38s I would love to get rid of pretty reasonable Posted using the WoodsBuggy Mobile App |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |