Two of these>
http://www.summitracing.com/parts/spw-2237/overview/Wired similar to this>
Attachment:
14150 Super Winch.pdf [75.23 KiB]
Downloaded 369 times
On my 5000# winch I used 2 gauge jumper cables for the leads 53, 54, 64 and 65.
For the switch I used a McMaster Carr # 7172K25
Number of Circuits 1
When Switch Is
Left Circuit, Is Off or On
Right, Circuit Is On or Off
Switch Action Springs Back to Center
Number of Terminals 3
Industry Designation SPDT (ON)-OFF-(ON)
Amp Rating at
125V AC 15
28V DC 20
Toggle Height 0.69"
Additional Specifications Washdown Switches
Three Position—Switch is Off in Center Position
I mounted the toggle in the dash, ran two 16 ga wires to the coil terminals on the solenoids mounted in a waterproof box.
Summit sells other solenoids that are more self contained.
Hopefully the pdf works