| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| suby wiring issue (were to start ) http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=18&t=11669 |
Page 1 of 1 |
| Author: | giveitagallon [ Mon May 02, 2011 9:30 pm ] |
| Post subject: | suby wiring issue (were to start ) |
shot in the dark but figured i would ask you guys . light green/ black f47 plug # 23 which is ground for fuel pump relay has a constant flash , i have other issues but im going to go step by step on this ! i figure i would start here because i am clueless on a ground sending ground pulse ! thanks for any help . Jason |
|
| Author: | volksdude2010 [ Mon May 02, 2011 10:14 pm ] |
| Post subject: | Re: suby wiring issue (were to start ) |
start with buying my subaru for $3000 lol i need mine gone |
|
| Author: | bmoore [ Mon May 02, 2011 10:30 pm ] |
| Post subject: | Re: suby wiring issue (were to start ) |
giveitagallon wrote: shot in the dark but figured i would ask you guys . light green/ black f47 plug # 23 which is ground for fuel pump relay has a constant flash , i have other issues but im going to go step by step on this ! i figure i would start here because i am clueless on a ground sending ground pulse ! thanks for any help . Jason pm rail 1914, he helped me a ton and has endless info on the suby wireing!!! and if he caint help the guys at engine wireing.com have always been free with advice every time ive called. |
|
| Author: | Tyrus [ Tue May 03, 2011 1:52 pm ] |
| Post subject: | Re: suby wiring issue (were to start ) |
http://www.cannell.co.uk/Subaru_Worksho ... mpreza.pdf lot of info here.. |
|
| Author: | BigScott [ Wed May 04, 2011 8:55 am ] |
| Post subject: | Re: suby wiring issue (were to start ) |
I'm pretty sure the fuel pump relay has a constant 12v going to it and the computer grounds the relay when it need to run the fuel pump. That is why you are seeing the pulse on the ground wire. |
|
| Author: | wonnabuggy32 [ Wed May 04, 2011 10:47 am ] |
| Post subject: | Re: suby wiring issue (were to start ) |
BigScott wrote: 'm pretty sure the fuel pump relay has a constant 12v going to it and the computer grounds the relay when it need to run the fuel pump. That is why you are seeing the pulse on the ground wire that sound rite... ill get you all the wiring diagrams tonite, those should help you out...
|
|
| Author: | MadMike [ Wed May 04, 2011 11:00 am ] |
| Post subject: | Re: suby wiring issue (were to start ) |
Big Scott is right. Constant 12v to relay, computer grounds relay, pump operates. Don't try to read too much into this stuff, it's not that complicated. |
|
| Author: | buggiejunky [ Wed May 04, 2011 10:23 pm ] |
| Post subject: | Re: suby wiring issue (were to start ) |
did u get the main relay working ??? u need it first |
|
| Author: | giveitagallon [ Thu May 05, 2011 7:40 am ] |
| Post subject: | Re: suby wiring issue (were to start ) |
buggiejunky wrote: did u get the main relay working ??? u need it first no work on wiring last night i took a break and worked on oil filter relocator , but main relay is getting worked on tonight ! thanks for the imput so far guys ! jason |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|