WoodsBuggy.com
http://www.woodsbuggy.com/phpBB3/

honda v tec ?
http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=17&t=8246
Page 2 of 3

Author:  Terry fryer [ Mon Dec 14, 2009 7:34 pm ]
Post subject:  Re: honda v tec ?

ImmortalSoul219 wrote:
Terry fryer wrote:
ImmortalSoul219 wrote:
Terry you swap the supercharger for a turbo setup and youll free up a good increase in power.
h. Yes i would, but I would no make it in the lower rpm's like I am now. He had a dyno graph of a tubocharged ecotec and it did't make power till like 5000.


What turbo? All depends on turbo size and trim. My buddys got a turbo ecotec with a T2 turbo. Hits in very low rpms.

Sorry to thread jack!

It was a 2007 cobalt ss I think.

Author:  giveitagallon [ Mon Dec 14, 2009 9:22 pm ]
Post subject:  Re: honda v tec ?

thread jacking on this is fine im up in the air now so talk away on the eco or v tec or talk about whatever , fredom of speech here :!: :!: :!: :!:

Author:  ImmortalSoul219 [ Mon Dec 14, 2009 9:41 pm ]
Post subject:  Re: honda v tec ?

giveitagallon wrote:
thread jacking on this is fine im up in the air now so talk away on the eco or v tec or talk about whatever , fredom of speech here :!: :!: :!: :!:


In that case! lol I could buy a couple ecotec's for the price of 1 honda engine. The swap went so easy in my buggy and impressed with the reliability and power, I even thought of swaping it into my blown Mazdaspeed protege.

Author:  giveitagallon [ Wed Dec 16, 2009 8:15 pm ]
Post subject:  Re: honda v tec ?

well , just got back from lookin at the possible doner car if this goes thru what a deal ! the car is a 2001 honda prelude with 72k smashed front end but it has a 4 cylinder vtec in her. price :shock: $ 300.00 :shock: complete car , so pretty much ill get the engine for free once i part it out !! now the question for you guys is what do you think of the 4 cylinder v tec with a t3 turbo ? will it be a good engine for the rail and also the rotation is correct on that engine correct ? thanks for your imput guys !........... thanks jason

Author:  ImmortalSoul219 [ Wed Dec 16, 2009 9:15 pm ]
Post subject:  Re: honda v tec ?

Nope sorry that most likely has the H22 engine. Counter clockwise rotation.

http://en.wikipedia.org/wiki/List_of_Honda_engines

Go down the list to the H22 and you will find the 1997-2001 Prelude with the H22.

Your honda choices are the K series or a V6 honda.

Author:  giveitagallon [ Wed Dec 16, 2009 9:21 pm ]
Post subject:  Re: honda v tec ?

so the vw is clockwise ? if i get the vin off the dash would you be able to tell the rotation off that , or were at do i find the info ?

Author:  ImmortalSoul219 [ Wed Dec 16, 2009 9:59 pm ]
Post subject:  Re: honda v tec ?

all honda 4 cylinders rotate counter clockwise * except the K series *. Any K series honda 4 cylinder engine has the correct rotation to work with the vw transaxle.

http://en.wikipedia.org/wiki/Honda_K_engine

Heres info on the K series engine and cars to look for with these engines.

Author:  giveitagallon [ Wed Dec 16, 2009 10:17 pm ]
Post subject:  Re: honda v tec ?

sorry about that , i did not see the link on your post the first time im going to get the engine code tommorrow to see what it is but like you said it sounds and looks like a reverse rotation engine dammit :cry: :cry: :cry: thanks jason

Author:  rockrockets1 [ Wed Dec 16, 2009 10:19 pm ]
Post subject:  Re: honda v tec ?

But on a good note you can haul ass backwards :lol: :lol: :lol: :lol:

Author:  nitro_mudder [ Wed Dec 16, 2009 11:05 pm ]
Post subject:  Re: honda v tec ?

I can see a Front wheel drive with rear stearing in your future!

Author:  ky-bc [ Thu Dec 17, 2009 1:30 am ]
Post subject:  Re: honda v tec ?

Can't wait to race an ecotec.... uphill or flatland 8)

Author:  ImmortalSoul219 [ Thu Dec 17, 2009 7:49 am ]
Post subject:  Re: honda v tec ?

ky-bc wrote:
Can't wait to race an ecotec.... uphill or flatland 8)


Well I want to try to get to one of these hill climb competitions this summer.

Author:  Terry fryer [ Thu Dec 17, 2009 2:18 pm ]
Post subject:  Re: honda v tec ?

I can't wait to race a Honda :D :D

Author:  rockrockets1 [ Thu Dec 17, 2009 4:52 pm ]
Post subject:  Re: honda v tec ?

I have not witness a ecotec But I have saw KY-BC's honda and that thing will scream

Author:  giveitagallon [ Thu Dec 17, 2009 7:40 pm ]
Post subject:  Re: honda v tec ?

you guys are to funny..... :lol: :lol: i see the thread being changed to honda vs ecotech..... ding ...ding.... ding .... lets get it on!!! shhhhhhhh do you hear that its the air cooled and the subie and the yes nitro the quad 4 boys are getting ready to start typing to get in on this huh !!!!!!!!!!!! lets not make this one of those thread like that one passat 2800 made that went nuts though !!!!! me personally you a good man if you own a rail buggy period , no matter what is pushin you around !!! oh ya rock yours counts to even those you have them purdy chains !!!!!!!!!

Author:  nitro_mudder [ Thu Dec 17, 2009 9:42 pm ]
Post subject:  Re: honda v tec ?

Well first off I think I've seen a few comments on here about buying american whether its harleys or tools. SO WHY NOT WC MOTORS! :shock: I love the fact that I run a GM waterpumper on stock plugs and maybe 2 oil changes that is turning 15 this season, lol. Its heavy but does great for a trail rider / medium hill climber. And yes I know It wont win a hill climb contest. ( But I blame the weak tranny for that, a good mid-engine tranny and crank the ponies out of it, then maybe) But that is another thread 8) . Now throw us into a wooded / hilly version of the baja 1000. Then let see a stroker run hard for 4 to 12 hours, woo hooo. But as I've said before, who cares what it runs on, I just love these things and wanna ride. Ok, who's next on the soap box?

Author:  ImmortalSoul219 [ Thu Dec 17, 2009 9:56 pm ]
Post subject:  Re: honda v tec ?

You know with just some simple cams and a good tuning I can be pushing just as much hp n torque as that honda v6 with 100 lbs less weight. I did a lot of research on engines when I was ready to upgrade the old vw. An I porb could of dont alot more. But the foreign engines just cost to damn much compared to domestic (9 out of 10 times). Im also about to rebuild my dd engine (mazda) and its costing me an arm n leg for parts.

Author:  Firebug [ Thu Dec 17, 2009 10:26 pm ]
Post subject:  Re: honda v tec ?

Boxers rule :wink:

Author:  kybuggy1 [ Fri Dec 18, 2009 1:58 am ]
Post subject:  Re: honda v tec ?

Firebug wrote:
Boxers rule :wink:

I agree, briefs are too restrictive! :lol: :lol:

Author:  ky-bc [ Fri Dec 18, 2009 9:15 am ]
Post subject:  Re: honda v tec ?

kybuggy1 wrote:
Firebug wrote:
Boxers rule :wink:

I agree, briefs are too restrictive! :lol: :lol:

I prefer the support that briefs offer :)

Author:  kybuggy1 [ Fri Dec 18, 2009 9:27 am ]
Post subject:  Re: honda v tec ?

ky-bc wrote:
kybuggy1 wrote:
Firebug wrote:
Boxers rule :wink:

I agree, briefs are too restrictive! :lol: :lol:

I prefer the support that briefs offer :)
You ever tried to put two grapefruits in a slingshot? Dont work for me :lol: :twisted: :lol:

Author:  rockrockets1 [ Fri Dec 18, 2009 10:56 am ]
Post subject:  Re: honda v tec ?

I don't know who started the rumor that a Harley was American .Between me and Karen we have had 9 Harleys and I only had 4 that were American made and I pushed them suckers more than I drove them
1984 the Evo was made thus ending the so called American made bike

Author:  nitro_mudder [ Fri Dec 18, 2009 10:59 am ]
Post subject:  Re: honda v tec ?

Didn't know that, that sucks.

Author:  ky-bc [ Fri Dec 18, 2009 5:36 pm ]
Post subject:  Re: honda v tec ?

Hey Larry, you might want to get that checked. Are they yellow too?

Author:  rockrockets1 [ Fri Dec 18, 2009 6:03 pm ]
Post subject:  Re: honda v tec ?

:shock:

Page 2 of 3 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/