It is currently Sat Apr 27, 2024 3:17 pm

View unanswered posts | View active topics


Board index » Tech and Fab » Water Cooled Engines

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 
  Print view Previous topic | Next topic 
Author Message
Terry fryer
 Post subject: fuel system
PostPosted: Mon Jun 15, 2009 3:27 pm 
Offline
User avatar

Joined: Sat Aug 23, 2008 5:42 pm
Posts: 612
Location: Ashland,Ky
What is everyone using for the fuel system. I priced all an fittings to do a pre filter, pump, post filter, and then a regulator. And it is going to be a couple hundred bucks. My question is what did everyone use for fuel filters, fuel line, and what type fittings. I have already got my fuel pump and regulator. Now I need to figure out what else to use.
Thanks for any help.
Top
 Profile  
 
Stevo
 Post subject: Re: fuel system
PostPosted: Mon Jun 15, 2009 5:11 pm 
Offline
WB Contributor
User avatar

Joined: Tue Jun 26, 2007 9:17 am
Posts: 1461
Location: Harmony Pa Wellsville rocks!!
I used high pressure rubber line. The fuel pump came from a v-12 jaguar and the filter came oem on the subaru, I also added a prefilter to keep dirt out of the pump. Total cost for fuel system was under 100 bucks.

_________________
"YOU CAN MAKE THINGS HAPPEN, WATCH THINGS HAPPEN OR WONDER WHAT THE F$$K HAPPEND...WE'RE MAKING THINGS HAPPEN" The strong words of Captain Phil! Rest in peice!
Top
 Profile  
 
Terry fryer
 Post subject: Re: fuel system
PostPosted: Mon Jun 15, 2009 9:30 pm 
Offline
User avatar

Joined: Sat Aug 23, 2008 5:42 pm
Posts: 612
Location: Ashland,Ky
What did you use for a prefilter? And what type fittings did you use? The ecotec runs at 58 psi at idle. I just don't want to waist money and it leak.
Top
 Profile  
 
Stevo
 Post subject: Re: fuel system
PostPosted: Mon Jun 15, 2009 9:46 pm 
Offline
WB Contributor
User avatar

Joined: Tue Jun 26, 2007 9:17 am
Posts: 1461
Location: Harmony Pa Wellsville rocks!!
I used brass fittings and went to local parts house and got a filter with 1/2 inlets for carbs. Used fuel injection rubber hose and clamps. The stock subaru uses rubber from line at frame to filter and then to the fuel rail. Ijust used the suby stuff as much as possible. The jag pump is capable of 80 psi in stock form. I have no leaks and beat on it pretty hard. I will get you some pics tomarrow.

_________________
"YOU CAN MAKE THINGS HAPPEN, WATCH THINGS HAPPEN OR WONDER WHAT THE F$$K HAPPEND...WE'RE MAKING THINGS HAPPEN" The strong words of Captain Phil! Rest in peice!
Top
 Profile  
 
Terry fryer
 Post subject: Re: fuel system
PostPosted: Mon Jun 15, 2009 10:36 pm 
Offline
User avatar

Joined: Sat Aug 23, 2008 5:42 pm
Posts: 612
Location: Ashland,Ky
Here is what I have spent all day figuring out. And it isn't very cheap. http://www.summitracing.com/checkout/cart.aspx
Top
 Profile  
 
Stevo
 Post subject: Re: fuel system
PostPosted: Tue Jun 16, 2009 7:56 pm 
Offline
WB Contributor
User avatar

Joined: Tue Jun 26, 2007 9:17 am
Posts: 1461
Location: Harmony Pa Wellsville rocks!!
Terry fryer wrote:
Here is what I have spent all day figuring out. And it isn't very cheap. http://www.summitracing.com/checkout/cart.aspx

Nothing here?

_________________
"YOU CAN MAKE THINGS HAPPEN, WATCH THINGS HAPPEN OR WONDER WHAT THE F$$K HAPPEND...WE'RE MAKING THINGS HAPPEN" The strong words of Captain Phil! Rest in peice!
Top
 Profile  
 
Terry fryer
 Post subject: Re: fuel system
PostPosted: Thu Jun 18, 2009 9:19 pm 
Offline
User avatar

Joined: Sat Aug 23, 2008 5:42 pm
Posts: 612
Location: Ashland,Ky
Well I guess it will just show on mine. It was 323.00 for the fittings and hose.
Top
 Profile  
 
Odyknuck
 Post subject: Re: fuel system
PostPosted: Fri Jun 19, 2009 7:52 am 
Offline
BOTM Winner
User avatar

Joined: Mon Apr 30, 2007 3:35 pm
Posts: 3097
Location: Rome Ohio
My system is dual fuel pumps and filters with Billet fuel rails all plumbed in braided Stainless steel line with AN fittings.

_________________
Water cooled Dry Sumped Subaru Powered Turbo Charged Fuel Injected 2500CC Tank. Oh Rah! He who dies with the most Toys not only wins, He also wears them out!
Top
 Profile  
 
Stevo
 Post subject: Re: fuel system
PostPosted: Sat Jun 20, 2009 2:00 pm 
Offline
WB Contributor
User avatar

Joined: Tue Jun 26, 2007 9:17 am
Posts: 1461
Location: Harmony Pa Wellsville rocks!!
Odyknuck wrote:
My system is dual fuel pumps and filters with Billet fuel rails all plumbed in braided Stainless steel line with AN fittings.

Lots of high flow parts for a low flow motor! :D

_________________
"YOU CAN MAKE THINGS HAPPEN, WATCH THINGS HAPPEN OR WONDER WHAT THE F$$K HAPPEND...WE'RE MAKING THINGS HAPPEN" The strong words of Captain Phil! Rest in peice!
Top
 Profile  
 
Odyknuck
 Post subject: Re: fuel system
PostPosted: Tue Jun 30, 2009 8:43 am 
Offline
BOTM Winner
User avatar

Joined: Mon Apr 30, 2007 3:35 pm
Posts: 3097
Location: Rome Ohio
Only untill the Turbo spools up! :mrgreen:

SubySteve wrote:
Odyknuck wrote:
My system is dual fuel pumps and filters with Billet fuel rails all plumbed in braided Stainless steel line with AN fittings.

Lots of high flow parts for a low flow motor! :D

_________________
Water cooled Dry Sumped Subaru Powered Turbo Charged Fuel Injected 2500CC Tank. Oh Rah! He who dies with the most Toys not only wins, He also wears them out!
Top
 Profile  
 
Stevo
 Post subject: Re: fuel system
PostPosted: Tue Jun 30, 2009 7:21 pm 
Offline
WB Contributor
User avatar

Joined: Tue Jun 26, 2007 9:17 am
Posts: 1461
Location: Harmony Pa Wellsville rocks!!
Odyknuck wrote:
Only untill the Turbo spools up! :mrgreen:

SubySteve wrote:
Odyknuck wrote:
My system is dual fuel pumps and filters with Billet fuel rails all plumbed in braided Stainless steel line with AN fittings.

Lots of high flow parts for a low flow motor! :D

:D

_________________
"YOU CAN MAKE THINGS HAPPEN, WATCH THINGS HAPPEN OR WONDER WHAT THE F$$K HAPPEND...WE'RE MAKING THINGS HAPPEN" The strong words of Captain Phil! Rest in peice!
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 

Board index » Tech and Fab » Water Cooled Engines

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 31 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group