WoodsBuggy.com
http://www.woodsbuggy.com/phpBB3/

Thoughts on these parts?
http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=17&t=16663		 Page 1 of 1
Author:  blackoutt [ Fri Feb 07, 2014 1:50 pm ]
Post subject:  Thoughts on these parts?
Looking for a header for the 2.2 ecotec. Anyone tried this?

http://www.ebay.com/itm/COBALT-HHR-SATU ... 3a88f2f108

And any thoughts about this fuel cell?

http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... ink:top:en

Thanks
Chris
Author:  blackoutt [ Fri Feb 07, 2014 1:54 pm ]
Post subject:  Re: Thoughts on these parts?
And where's the best place for a decent gauge cluster? I'm not looking to spend $200 though for just a cluster.
Author:  UncleJerm76 [ Mon Feb 10, 2014 5:22 pm ]
Post subject:  Re: Thoughts on these parts?
blackoutt wrote:
Looking for a header for the 2.2 ecotec. Anyone tried this?

http://www.ebay.com/itm/COBALT-HHR-SATU ... 3a88f2f108

And any thoughts about this fuel cell?

http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... ink:top:en

Thanks
Chris


Tried to view them but both items have been removed. :? ..but I have read a lot of posts about people being very pleased with the SS header off eBay if that is what you found? ...And I am in the market for a fuel cell also so I want to see the one your referring too! :mrgreen:

blackoutt wrote:
And where's the best place for a decent gauge cluster? I'm not looking to spend $200 though for just a cluster.

Ive seen them in local autoparts store too, but here is one from one from a trusted brand: http://www.jegs.com/i/Auto+Meter/105/2327/10002/-1?CAWELAID=1710764603&catargetid=230006180000514800&cadevice=c&&cagpspn=pla&gclid=COz-jpm-wrwCFchhfgodpEwAnQ
Author:  blackoutt [ Wed Feb 12, 2014 2:11 am ]
Post subject:  Re: Thoughts on these parts?
http://www.ebay.com/itm/CHEVY-COBALT-HH ... 0d&vxp=mtr


http://www.ebay.com/itm/Chevrolet-Chevy ... 5a&vxp=mtr

http://www.ebay.com/itm/Pacesetter-Exha ... 4d&vxp=mtr

Not spending $500 on the cbm headers lol.

As far as the fuel cell...

http://www.ebay.com/itm/251289947366?ss ... 1423.l2649
Author:  UncleJerm76 [ Wed Feb 12, 2014 10:03 am ]
Post subject:  Re: Thoughts on these parts?
blackoutt wrote:
http://www.ebay.com/itm/CHEVY-COBALT-HHR-ION-2-2-2-4-NON-TURBO-ECOTEC-STAINLESS-EXHAUST-RACE-HEADER-BOLT-/231156896781?pt=Motors_Car_Truck_Parts_Accessories&hash=item35d206540d&vxp=mtr


http://www.ebay.com/itm/Chevrolet-Chevy ... 5a&vxp=mtr

http://www.ebay.com/itm/Pacesetter-Exha ... 4d&vxp=mtr

Not spending $500 on the cbm headers lol.

As far as the fuel cell...

http://www.ebay.com/itm/251289947366?ss ... 1423.l2649


I don't blame you. I've heard good stuff about the $120 SS ebay header, Ill prob go that route when the time comes, I do hate how the OEM steel header is the only thing on the engine that is a heavy rust monster. As far as the square tank goes, that looks like a nice unit to me, but I cant find room for something that bulky. Have you thought about going with a custom spun aluminum tank? Can tuck those just about anywhere. I've been eyeballing this Co.: http://www.aluminumgastanks.net/options.html I like how you can have them do whatever you want, prices seem very reasonable for custom tank work also. They have 10", 8", 6" at just about any length. If you don't need a custom tank, there are spun aluminum tanks on eBay that are very inexpensive.
Author:  blackoutt [ Wed Feb 12, 2014 11:48 pm ]
Post subject:  Re: Thoughts on these parts?
I just want to make sure I have a 10-12 gal tank. I plan on using it as a daily driver a lot during the summer. And I know pacesetter have made a name for themselves but problem is the angle or lack there of I should say.
Author:  blackoutt [ Thu Feb 13, 2014 12:04 am ]
Post subject:  Re: Thoughts on these parts?
Probably going to go the $120 route and hope for the best. Tank looks fine to me as well just need to make sure I can get some straps to mount it securely.

Have you decided what your doing for a fuse box yet?
Author:  purplerail [ Sat Feb 15, 2014 9:23 pm ]
Post subject:  Re: Thoughts on these parts?
I bought the same header I like it
Author:  purplerail [ Sat Feb 15, 2014 9:25 pm ]
Post subject:  Re: Thoughts on these parts?
Just put the same cell on mine also do not go with a plastic one they suck
Author:  blackoutt [ Sun Feb 16, 2014 5:09 am ]
Post subject:  Re: Thoughts on these parts?
Did you get the exact cell? Or just one similar? Just curious if it's the same if you were satisfied with the quality.
Author:  Twotrackerbryan [ Sat Mar 01, 2014 2:27 pm ]
Post subject:  Re: Thoughts on these parts?
blackoutt wrote:
Looking for a header for the 2.2 ecotec. Anyone tried this?

http://www.ebay.com/itm/COBALT-HHR-SATU ... 3a88f2f108

And any thoughts about this fuel cell?

http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... ink:top:en

Thanks
Chris


Check out my build for pictures on the header installed. I have no complaints!
http://www.woodsbuggy.com/forum/buggy-builds/9243
Author:  Terry fryer [ Sun Mar 02, 2014 2:56 pm ]
Post subject:  Re: Thoughts on these parts?
Image
That is the same header im using

Sent from my SAMSUNG-SGH-I337 using Tapatalk
Author:  blackoutt [ Mon Mar 03, 2014 11:50 am ]
Post subject:  Re: Thoughts on these parts?
Thanks guys. Helps make my decision all the more easier. Now onto the final steps.
Author:  blackoutt [ Mon Mar 03, 2014 11:51 am ]
Post subject:  Re: Thoughts on these parts?
Just out of curiosity what'd you guys use for a block off for the power steering pump?
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/