WoodsBuggy.com
http://www.woodsbuggy.com/phpBB3/

Ecotec has arrived!
http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=17&t=16612
Page 1 of 1

Author:  UncleJerm76 [ Wed Jan 29, 2014 10:56 am ]
Post subject:  Ecotec has arrived!

Just got my 2.4 from AFI yesterday. Feels like being little kid at Christmas all over again. Can't wait to get started on the swap, but this thing is CLEAN. The adapter plate, flywheel, ECU & custom harness is sick - top notch stuff! Good job Shaun, another happy customer here - well worth the wait.

Posted using the WoodsBuggy Mobile App

Attachments:
IMG_5543[1].jpg
IMG_5543[1].jpg [ 269.51 KiB | Viewed 9455 times ]
ImageUploadedByWoodsBuggy1391007331.524674.jpg
ImageUploadedByWoodsBuggy1391007331.524674.jpg [ 94.41 KiB | Viewed 9478 times ]
ImageUploadedByWoodsBuggy1391007292.812300.jpg
ImageUploadedByWoodsBuggy1391007292.812300.jpg [ 85.12 KiB | Viewed 9478 times ]

Author:  ScramblerXLE [ Wed Jan 29, 2014 11:14 am ]
Post subject:  Re: Ecotec has arrived!

Awesome! Looking forward to doing the swap myself :D

Author:  Rick [ Wed Jan 29, 2014 12:05 pm ]
Post subject:  Re: Ecotec has arrived!

Very cool looks to be a excellent vendor 8)

Author:  BAJABUGNUT [ Wed Jan 29, 2014 12:39 pm ]
Post subject:  Re: Ecotec has arrived!

you suck, u got urs before me!! :evil:

!! once u got the bol how long did it take?

Author:  UncleJerm76 [ Wed Jan 29, 2014 1:23 pm ]
Post subject:  Re: Ecotec has arrived!

BAJABUGNUT wrote:
you suck, u got urs before me!! :evil:

!! once u got the bol how long did it take?


LOL - you'll prob have yours installed and running before me ...I've got way too many projects!!! On shipping time, I'm not a good one to judge it by. Lots of innocents slowed my order down. I ordered it back on Dec 3rd, they had the motor done quick and ready for shipping - even sent me a picture of it done. but then the top half of the USA was snowed in. All freight halted for weeks. Then a shipping incident delayed it a little longer. It was fine though - Shaun kept me updated along the way, communication was great. I had lots to do getting my old WC sold and parted out anyway.


Posted using the WoodsBuggy Mobile App

Author:  BAJABUGNUT [ Wed Jan 29, 2014 1:47 pm ]
Post subject:  Re: Ecotec has arrived!

Mine shipped Monday, on pins and needles..... :) we can learn from each other then....

Author:  ScramblerXLE [ Wed Jan 29, 2014 1:58 pm ]
Post subject:  Re: Ecotec has arrived!

And the rest of us can learn from both of you! Hope to have one in mine this Summer...

Author:  BAJABUGNUT [ Wed Jan 29, 2014 4:18 pm ]
Post subject:  Re: Ecotec has arrived!

I just noticed you get free orange neon straps to hold the beer cooler in. AWSOME!!!!

Author:  UncleJerm76 [ Wed Jan 29, 2014 5:34 pm ]
Post subject:  Re: Ecotec has arrived!

BAJABUGNUT wrote:
I just noticed you get free orange neon straps to hold the beer cooler in. AWSOME!!!!


Its the little things right? :P ...whats got me most excited is they normally tune for premium fuel, but I had Shaun tune it for regular octane. I might loose a couple HP but I get the added convenience of only needing one spare gas can that works with all my toys :D

Author:  2800passat [ Wed Jan 29, 2014 11:30 pm ]
Post subject:  Re: Ecotec has arrived!

http://i1295.photobucket.com/albums/b62 ... 1390965033 Try installing that monster this way. See how the shifter and cables just simply bolt to the floor. 219:1 2nd gear x's 316:1 ring and pinion x's 307:1 Lincoln Mark 7 aluminum diff equals 21.24 turns per axle rotation. A 538 bus is 20.44. Perfect for roasting 35 and 38 Boggers. Tsl 40's etc. 3rd gear, 4th and 5th are very close and low geared. No more bus trans or junk off the internet. It's 5 years old and still no busted trans. Go with an Ecotec automatic!

Author:  2800passat [ Wed Jan 29, 2014 11:51 pm ]
Post subject:  Re: Ecotec has arrived!

2nd gear is 21:24 and 3rd is 12.61 rpm's per 1 axle rotation. A 538 for example is 11.03:1 in 2nd gear. So basicly, my 3rd pulls stronger than a 538 2nd.

Author:  UncleJerm76 [ Thu Jan 30, 2014 4:46 pm ]
Post subject:  Re: Ecotec has arrived!

2800passat wrote:
http://i1295.photobucket.com/albums/b624/passat14/davenjuliejune2013325_zpsa3e6fd5a.jpg?t=1390965033 Try installing that monster this way. See how the shifter and cables just simply bolt to the floor. 219:1 2nd gear x's 316:1 ring and pinion x's 307:1 Lincoln Mark 7 aluminum diff equals 21.24 turns per axle rotation. A 538 bus is 20.44. Perfect for roasting 35 and 38 Boggers. Tsl 40's etc. 3rd gear, 4th and 5th are very close and low geared. No more bus trans or junk off the internet. It's 5 years old and still no busted trans. Go with an Ecotec automatic!


Im rockin' a 3 rib right now, a couple other local WC guys running them too. I've been told as long I treat her right she wont leave me. We will see. If you pulled up next to me I would not know what to do, prob put in reverse and run. Your buggy scares me LOL :lol: That is an innovative and unique buggy you built! Got any videos of it climbing?

Author:  2800passat [ Thu Jan 30, 2014 7:37 pm ]
Post subject:  Re: Ecotec has arrived!

This current motor escaped from the junk yard. It has 150 compression if it is warmed up. Medium blow-by. I have a good motor on deck with 190-210, but I don't climb anything substantial anyway. Been hurt t00 many times and my finances can not deal with hospitals. I can tell ya this. It grips better the steeper and the front A arms lift up every now and then but atleast I do not have to let off the gas like my old traditionally mounted w/c. This has a 113" wheel base and 80" wide with cut 35's. I took the uncut TSL 40's off. It may be too heavy for hillclimb competition, but it floats over rocks.

Author:  tommil77 [ Fri Jan 31, 2014 12:40 am ]
Post subject:  Re: Ecotec has arrived!

Wish I was down there to join in on the excitement and help on the project Unclejerm. I was looking at some past spring time ride pictures and arrived at this conclusion: WE NEED TO GET BUSY!! Awesome riding weather coming up, and so many places needing explored.

Author:  UncleJerm76 [ Fri Jan 31, 2014 1:02 am ]
Post subject:  Re: Ecotec has arrived!

tommil77 wrote:
Wish I was down there to join in on the excitement and help on the project Unclejerm. I was looking at some past spring time ride pictures and arrived at this conclusion: WE NEED TO GET BUSY!! Awesome riding weather coming up, and so many places needing explored.


Come on down, many hands make light work, besides its warmer here ...a little :P Ill be following the trail you blaze with those fancy new tree bars <thumbs up>


Posted using the WoodsBuggy Mobile App

Author:  2800passat [ Fri Jan 31, 2014 3:07 am ]
Post subject:  Re: Ecotec has arrived!

<embed width="600" height="361" type="application/x-shockwave-flash" allowFullscreen="true" allowNetworking="all" wmode="transparent" src="http://static.photobucket.com/player.swf" flashvars="file=http%3A%2F%2Fvid1295.photobucket.com%2Falbums%2Fb624%2Fpassat14%2FDSCI0208_zps2015f6ea.mp4">

Author:  Alpha Fab [ Fri Jan 31, 2014 10:11 am ]
Post subject:  Re: Ecotec has arrived!

Looks great Jeremy! Keep us posted on the your build - your buggy is going to be mean!

-AFI

Author:  Alpha Fab [ Fri Jan 31, 2014 10:17 am ]
Post subject:  Re: Ecotec has arrived!

BAJABUGNUT wrote:
I just noticed you get free orange neon straps to hold the beer cooler in. AWSOME!!!!


LOL - believe me - we've tried differnt ways to make sure these ship safe and secure from us. This is THE best way! =) Plus, who doesn't like free rachet straps?

Author:  BAJABUGNUT [ Wed Feb 05, 2014 6:56 pm ]
Post subject:  Re: Ecotec has arrived!

Shaun, you might want to sinch down on the engine straps a bit more, my engine was a tad loose. Nothing major but just a consideration.

Author:  UncleJerm76 [ Thu Feb 06, 2014 4:15 pm ]
Post subject:  Re: Ecotec has arrived!

BAJABUGNUT wrote:
Shaun, you might want to sinch down on the engine straps a bit more, my engine was a tad loose. Nothing major but just a consideration.


Mine was great, nice and tight.


Posted using the WoodsBuggy Mobile App

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/