| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| ECOTEC DRYSUMP http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=17&t=16357 |
Page 1 of 1 |
| Author: | lpb [ Mon Nov 25, 2013 5:20 pm ] |
| Post subject: | ECOTEC DRYSUMP |
starting new buggy. going to the so called dark side,ooooh,liquid cooled.have purched a 2.4 ecotec.i have somewhat got what i need figured out, except ,what dry sump system to run ,or is anyone even running a drysump. |
|
| Author: | Terry fryer [ Mon Nov 25, 2013 7:00 pm ] |
| Post subject: | Re: ECOTEC DRYSUMP |
Haven't run one on my sc buggy for about 4 or 5 years now with no trouble. And all the ecotec buggies I ride with haven't had any trouble. Just protect your oil pan they will break easy. When hitting a rock or something Posted using the WoodsBuggy Mobile App |
|
| Author: | ImmortalSoul219 [ Mon Nov 25, 2013 9:47 pm ] |
| Post subject: | Re: ECOTEC DRYSUMP |
Big money in a dry sump setup Posted using the WoodsBuggy Mobile App |
|
| Author: | Alpha Fab [ Tue Nov 26, 2013 10:44 am ] |
| Post subject: | Re: ECOTEC DRYSUMP |
Terry fryer wrote: Haven't run one on my sc buggy for about 4 or 5 years now with no trouble. And all the ecotec buggies I ride with haven't had any trouble. Just protect your oil pan they will break easy. When hitting a rock or something Posted using the WoodsBuggy Mobile App ImmortalSoul219 wrote: Big money in a dry sump setup Posted using the WoodsBuggy Mobile App Agreed. No need on a stock to mild system; make sure you have a good skid pan. If you have money burning a hole in your pocket check these guys: www.daileyengineering.com/dry_sump_oil_pans.htm -Shaun |
|
| Author: | ImmortalSoul219 [ Tue Nov 26, 2013 9:08 pm ] |
| Post subject: | Re: ECOTEC DRYSUMP |
I have cracked an oil pan but they are all over the junkyards. A stronger skid plate an its all good. |
|
| Author: | hyde [ Thu Nov 28, 2013 1:10 pm ] |
| Post subject: | Re: ECOTEC DRYSUMP |
Racebug and I run a Moroso oil Accumulator or Canton accusump . Drews did have Canton I think it is 3 QT of oil . |
|
| Author: | UncleJerm76 [ Wed Jan 29, 2014 10:49 am ] |
| Post subject: | Re: ECOTEC DRYSUMP |
I could see a need for this is you want to sit the motor lower. Been thinking a lot about this myself, will be following this thread to see what you end up doing. Posted using the WoodsBuggy Mobile App |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|