WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
suby fuel line question http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=17&t=13501 |
Page 1 of 1 |
Author: | plumberbill [ Tue Apr 10, 2012 1:06 pm ] |
Post subject: | suby fuel line question |
anybody know how to make the transition from the steel fuel line on a suby to 6an braided hose. stock suby uses a hd s.s. clamp on the steel line. the o.d. of the line is 7.94mm or .314" the id of 6an hose is slightly larger not sure if the clamp would work. |
Author: | Odyknuck [ Tue Apr 10, 2012 2:22 pm ] |
Post subject: | Re: suby fuel line question |
Cut the bump off the end and use a 5/16" OD (.3125") Compression to 3/8" NPT adapter fitting. |
Author: | Terry fryer [ Tue Apr 10, 2012 2:55 pm ] |
Post subject: | Re: suby fuel line question |
You can get fuel rail adapters just call summit. They just pop on. And have a 6 an male on the other end |
Author: | Odyknuck [ Tue Apr 10, 2012 4:53 pm ] |
Post subject: | Re: suby fuel line question |
Even better Ideal. Did not know they made them. |
Author: | giveitagallon [ Tue Apr 10, 2012 6:49 pm ] |
Post subject: | Re: suby fuel line question |
Terry fryer wrote: You can get fuel rail adapters just call summit. They just pop on. And have a 6 an male on the other end Huh , who would have thought ! ....... Smarty pants |
Author: | Terry fryer [ Wed Apr 11, 2012 1:33 am ] |
Post subject: | Re: suby fuel line question |
giveitagallon wrote: Huh , who would have thought ! ....... Smarty pants I think they make them in 1/4" and 5/16" That's what I run on my eco |
Author: | plumberbill [ Wed Apr 11, 2012 9:03 am ] |
Post subject: | Re: suby fuel line question |
Terry fryer wrote: giveitagallon wrote: Huh , who would have thought ! ....... Smarty pants I think they make them in 1/4" and 5/16" That's what I run on my eco just purchased it from summit (5/16). also made in 3/8 |
Author: | bluebuggy [ Wed Apr 11, 2012 10:17 am ] |
Post subject: | Re: suby fuel line question |
plumberbill wrote: Terry fryer wrote: giveitagallon wrote: Huh , who would have thought ! ....... Smarty pants I think they make them in 1/4" and 5/16" That's what I run on my eco just purchased it from summit (5/16). also made in 3/8 Napa also sells them I picked mine up there I know they have the 1/4 5/16 3/8 but not sure about AN. |
Author: | RaceBugg1098 [ Thu Apr 12, 2012 12:06 pm ] |
Post subject: | Re: suby fuel line question |
I just brazed an-6 ends right onto the rail. i cut some old steel fittings apart and drilled the back side to fit over the od of the fuel rail and brzed them up! freebie |
Author: | JeffClay [ Thu May 31, 2012 9:34 pm ] |
Post subject: | Re: suby fuel line question |
I thought you were the plumber? |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |