Idle bypass valve
| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| high idle http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=17&t=11120 |
Page 1 of 1 |
| Author: | volksdude2007 [ Tue Jan 25, 2011 10:07 pm ] |
| Post subject: | high idle |
my subaru 2.2 has been running at high idle around 2grand maybe a little more i noticed if i pinch the return line with my finger it drops the idle about 500 any of you guys running these motors ever have a high idle issue and and if you have a tach where about is yours idleing thanks |
|
| Author: | buggiejunky [ Tue Jan 25, 2011 10:35 pm ] |
| Post subject: | Re: high idle |
we did a suby swap and it had an idle problem and im pretty sure it was a problem between the pvc plumbing and air to the idle air control |
|
| Author: | Maddog [ Tue Jan 25, 2011 10:56 pm ] |
| Post subject: | Re: high idle |
volksdude2007 wrote: my subaru 2.2 has been running at high idle around 2grand maybe a little more i noticed if i pinch the return line with my finger it drops the idle about 500 any of you guys running these motors ever have a high idle issue and and if you have a tach where about is yours idleing thanks Mine idles right at 600 rpm, I suspect you have a vacuum leak, spray some wd40 around intake,vacuum hoses, etc to see if you can find it. |
|
| Author: | volksdude2007 [ Wed Jan 26, 2011 1:24 pm ] |
| Post subject: | Re: high idle |
i will try what both you say i looked at my hose for my mass air flow sensor it is loose where i put sealer around it and i will also check for vaccuum leaks thanks guys |
|
| Author: | bluebuggy [ Wed Jan 26, 2011 3:30 pm ] |
| Post subject: | Re: high idle |
Idle bypass valve
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|