WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
Motor Mounts??? http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=17&t=10835 |
Page 1 of 1 |
Author: | lngtrvl2332 [ Fri Dec 10, 2010 11:36 am ] |
Post subject: | Motor Mounts??? |
Hopefully bolting my new Subaru up soon... Should I run motor mounts ( I was guessing YES) ??? If so do they need to be anything special or just solid mounts that come off the frame??? Thanks. |
Author: | Maddog [ Fri Dec 10, 2010 11:55 am ] |
Post subject: | Re: Motor Mounts??? |
My bellhousing is mounted top ears and bottom, no motor mounts. No problems for 8 yrs. |
Author: | MadMike [ Fri Dec 10, 2010 11:58 am ] |
Post subject: | Re: Motor Mounts??? |
Some folk use motor mounts, some don't. I didn't on my last build and I'm thinking on using them on this build. I didn't have any problems not having them, just cheep insurance. All it needs to be is a solid mount if everything is solid mounted. |
Author: | Firebug [ Fri Dec 10, 2010 6:28 pm ] |
Post subject: | Re: Motor Mounts??? |
I supported the wishbone to the frame at the ends near the engine..was fine for the 4 cylinder..when I went to a 6 banger I made some motor mounts at the factory location on the suby,,kinda hanger style. |
Author: | BigScott [ Sun Dec 12, 2010 2:02 am ] |
Post subject: | Re: Motor Mounts??? |
I made a solid mount that I welded to the stock motor mount plates. |
Author: | PhillipM [ Sun Dec 12, 2010 10:14 am ] |
Post subject: | Re: Motor Mounts??? |
Run a pair to the rear half cage on ours, we cracked a bellhousing back on the old VW so not risking it with the rotary. |
Author: | lngtrvl2332 [ Sun Dec 12, 2010 12:06 pm ] |
Post subject: | Re: Motor Mounts??? |
That looks easy enough. I am using all four mounting points on my bellhousing as well so I don't think it will go anywhere. Thanks for the suggestions. |
Author: | bmoore [ Sun Dec 12, 2010 6:51 pm ] |
Post subject: | Re: Motor Mounts??? |
at first i didnt run any motor mounts with my new suby! but the suby broke the front trans mount so this weekend i repaired tranny mount and fabed up some solid motor mounts |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |