my cvs are full race preped and they always click no matter what angle they are at, been that way since I built the buggy, even my old worn out ones click, but I havnt broke one yet (i just jynxed myself)
| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| clicking 3 rib http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=12&t=9443 |
Page 1 of 1 |
| Author: | frankenbuggy06 [ Mon May 10, 2010 11:28 am ] |
| Post subject: | clicking 3 rib |
i've got a 3 rib layin here that when it is in it would click when riding on a angle but not on the flat fround. i think it could be the spiders, but i have no clue i dont know trannys. any help is greatly appreciated. |
|
| Author: | RaceBugg1098 [ Mon May 10, 2010 12:03 pm ] |
| Post subject: | Re: clicking 3 rib |
it could just be your cv's |
|
| Author: | frankenbuggy06 [ Mon May 10, 2010 12:06 pm ] |
| Post subject: | Re: clicking 3 rib |
they're new cv's. and it was doing it before we put them in |
|
| Author: | Odyknuck [ Mon May 10, 2010 12:08 pm ] |
| Post subject: | Re: clicking 3 rib |
Even new CVs will click if you have over extended there angles and did not clock them. |
|
| Author: | frankenbuggy06 [ Mon May 10, 2010 12:21 pm ] |
| Post subject: | Re: clicking 3 rib |
the buggy had no rear heigth at all. the axles were almost straight. but not straight |
|
| Author: | RaceBugg1098 [ Mon May 10, 2010 12:39 pm ] |
| Post subject: | Re: clicking 3 rib |
my cvs are full race preped and they always click no matter what angle they are at, been that way since I built the buggy, even my old worn out ones click, but I havnt broke one yet (i just jynxed myself)
|
|
| Author: | frankenbuggy06 [ Mon May 10, 2010 12:42 pm ] |
| Post subject: | Re: clicking 3 rib |
We swapped out the tranny to see if it was it, kept the same cv's in and it dont click with the new tranny. |
|
| Author: | chris38375 [ Tue May 11, 2010 10:06 am ] |
| Post subject: | Re: clicking 3 rib |
pull the bellhousing off and check the spider gears could have a tooth broke |
|
| Author: | RaceBugg1098 [ Tue May 11, 2010 11:40 am ] |
| Post subject: | Re: clicking 3 rib |
chris38375 wrote: pull the bellhousing off and check the spider gears could have a tooth broke or even just pull the drain plug out to see if it looks like a bomb went off |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|