It is currently Sun May 03, 2026 4:08 am

View unanswered posts | View active topics


Board index » Tech and Fab » Transmissions

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 
  Print view Previous topic | Next topic 
Author Message
Firebug
 Post subject: Sprocket bolts
PostPosted: Wed Sep 09, 2009 5:43 pm 
Offline
Global moderator
User avatar

Joined: Wed May 30, 2007 2:01 pm
Posts: 5137
Location: Hazel Green, Alabama
Learned the hard way that the original size 8mm bolts shear so I upgraded to 7/16-20 socket head bolts,,here is a handy way to hold the stub axle in my craftsman drill press,,,I got lucky the hole in the platform is just big enough to slide the stub axle in. Then I ran the hub nut on to steady it while I tapped it.

Image

Image
side by side comparison of bolts
Image

_________________
Image If your clutch ain't slippin,, you probably got it adjusted right!!!!!
Top
 Profile  
 
kybuggy1
 Post subject: Re: Sprocket bolts
PostPosted: Wed Sep 09, 2009 9:13 pm 
Offline
WoodsBuggy Addict
User avatar

Joined: Fri Feb 02, 2007 1:39 am
Posts: 2838
Location: Louisville, KY
That oughta hold 'em , Marty!
............maybe. Might need some pins too when you mount them fresh cut big boggers. :wink:
Top
 Profile  
 
Firebug
 Post subject: Re: Sprocket bolts
PostPosted: Wed Sep 09, 2009 9:18 pm 
Offline
Global moderator
User avatar

Joined: Wed May 30, 2007 2:01 pm
Posts: 5137
Location: Hazel Green, Alabama
kybuggy1 wrote:
That oughta hold 'em , Marty!
............maybe. Might need some pins too when you mount them fresh cut big boggers. :wink:

Charles Lemonade runs this same setup with no pins with 42" tires and much bigger sprocket,,,this should be fine even with them KOKO cut boggers,,and oh yea I got one mounted and it looks KILLER :wink:

_________________
Image If your clutch ain't slippin,, you probably got it adjusted right!!!!!
Top
 Profile  
 
kyjr.buggy1
 Post subject: Re: Sprocket bolts
PostPosted: Thu Sep 10, 2009 2:06 pm 
Offline
BOTM Winner
User avatar

Joined: Mon Apr 09, 2007 11:39 pm
Posts: 891
Location: LOUISVILLE, KY
Glad to hear ya got your problem solved, Marty! Now get em mounted on 'er, I wana see them bad boys in action!

-Dakotah/koko

_________________
JeffClay wrote:
you guys are all gay. Let's have fun in our damn buggies and quit bitching.

-Dakotah/koko
keep on keepin' on!!
Top
 Profile  
 
Firebug
 Post subject: Re: Sprocket bolts
PostPosted: Thu Sep 10, 2009 3:28 pm 
Offline
Global moderator
User avatar

Joined: Wed May 30, 2007 2:01 pm
Posts: 5137
Location: Hazel Green, Alabama
kyjr.buggy1 wrote:
Glad to hear ya got your problem solved, Marty! Now get em mounted on 'er, I wana see them bad boys in action!

-Dakotah/koko

sneak peak


Image

_________________
Image If your clutch ain't slippin,, you probably got it adjusted right!!!!!
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 

Board index » Tech and Fab » Transmissions

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group