| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| No reverse http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=12&t=6435 |
Page 1 of 1 |
| Author: | Blueyedevil [ Mon Apr 27, 2009 9:00 pm ] |
| Post subject: | No reverse |
First off i had a blast this weekend we were out all day friday saturday and sunday, other than my 1641 being a little weak for my heavy buggy everything was great. Heres the bad part, while backing off my T trailer my front tires set down where the back tires sit and there was a loud pop and now nothing in reverse but all forward gears work in my 3 rib, im kind of glad it happened at my garage and not out on a trail. Over the winter i put a super diff in from weddle with 11 tooth spiders and it has chromoly 930 axle flanges, should i try to find a 5 rib to put my parts in or upgrade to a 6 rib and sell the 002 parts to offset the price of a 6 rib and 930 drive flanges? Im kind of worried about the higher gearing of the 091 because im constantly shifting from 1st to 2nd on the trail already. |
|
| Author: | chris38375 [ Mon Apr 27, 2009 11:28 pm ] |
| Post subject: | Re: No reverse |
u can use any case u want to,they are all the same,002 gears are strong if u buy weddle gears,keep ur 002 and buy a 1st and 2nd gear stack and put it all in a 5 or six rib case then u will have a strong tranny,,sounds like u got reverse or the gear came off in the bell housing |
|
| Author: | turboblue [ Tue Apr 28, 2009 1:14 pm ] |
| Post subject: | Re: No reverse |
Little difference in strength of a 3, 5 or 6 rib reverse gears. All straight cut spur gears with little engagement. Until you upgrade the powerplant you won't be happy with a 5 or 6 rib. Those are geared taller than your 3 rib. 091 case is different than the 002 style. |
|
| Author: | chris38375 [ Tue Apr 28, 2009 1:36 pm ] |
| Post subject: | Re: No reverse |
turboblue wrote: Little difference in strength of a 3, 5 or 6 rib reverse gears. All straight cut spur gears with little engagement. Until you upgrade the powerplant you won't be happy with a 5 or 6 rib. Those are geared taller than your 3 rib. 091 case is different than the 002 style. a 3 5 and 6 rib case aint the same?ive never seen the difference,ive put a 6 rib case on a 3 rib mid section,there all the same length,bellhousings are different |
|
| Author: | turboblue [ Tue Apr 28, 2009 1:47 pm ] |
| Post subject: | Re: No reverse |
chris38375 wrote: turboblue wrote: Little difference in strength of a 3, 5 or 6 rib reverse gears. All straight cut spur gears with little engagement. Until you upgrade the powerplant you won't be happy with a 5 or 6 rib. Those are geared taller than your 3 rib. 091 case is different than the 002 style. a 3 5 and 6 rib case aint the same?ive never seen the difference,ive put a 6 rib case on a 3 rib mid section,there all the same length,bellhousings are different What are you calling mid-section? The part the CV drive flanges come out? What are you calling the case? 091 6 rib has wider gearbox gears. |
|
| Author: | chris38375 [ Tue Apr 28, 2009 2:07 pm ] |
| Post subject: | Re: No reverse |
a case is a case,3 5 or 6 rib,if u have the right bearing cups that hold the diff in,u can use any case u want in an 002 transmission |
|
| Author: | turboblue [ Tue Apr 28, 2009 5:00 pm ] |
| Post subject: | Re: No reverse |
chris38375 wrote: a case is a case,3 5 or 6 rib,if u have the right bearing cups that hold the diff in,u can use any case u want in an 002 transmission You can use any case. The part I meant was different was the section behind the nosecone. http://www.longenterprises.com/diagram_ ... usings.htm #34 |
|
| Author: | chris38375 [ Tue Apr 28, 2009 5:07 pm ] |
| Post subject: | Re: No reverse |
yep,thats what i was talkin bout |
|
| Author: | chris38375 [ Mon May 04, 2009 9:57 pm ] |
| Post subject: | Re: No reverse |
any luck on fixin reverse |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|