|
BOTM Winner |
|
Joined: Mon Dec 25, 2006 1:57 pm Posts: 1343 Location: Patrick Springs, Virginia
|
With shifter removed from the car make sure the shifter socket is in the middle of the hole when the trans is in neutral. Make sure you have a lockout plate installed under the shifter base when you put the shifter back in.. Make sure you have an adjuster welded in the shift rod someplace. Loosen the adjuster and put the shifter in neutral. From thins point it's small adjustments till you get it perfect. It takes some practice. You have to find second gear and lock the shift rod adjuster while it's engaged in 2nd gear. Then your adjustments from this point will be VERY small.
|
|