WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
Trans Jig http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=12&t=17965 |
Page 1 of 1 |
Author: | bigDsmith [ Tue Jan 26, 2016 9:45 pm ] |
Post subject: | Trans Jig |
Can I use an 091 case as a jig to set set up my 002? Sent from my VS985 4G using Tapatalk |
Author: | reno2165 [ Tue Jan 26, 2016 11:44 pm ] |
Post subject: | Re: Trans Jig |
Yes |
Author: | bigDsmith [ Tue Jan 26, 2016 11:53 pm ] |
Post subject: | Re: Trans Jig |
Thanks Sent from my VS985 4G using Tapatalk |
Author: | RaceBugg1098 [ Wed Jan 27, 2016 8:53 am ] |
Post subject: | Re: Trans Jig |
no |
Author: | bigDsmith [ Wed Jan 27, 2016 10:06 am ] |
Post subject: | Re: Trans Jig |
Hmm. Thanks Sent from my VS985 4G using Tapatalk |
Author: | RaceBugg1098 [ Wed Jan 27, 2016 11:46 am ] |
Post subject: | Re: Trans Jig |
3 and 5 rib can share a jig but 091 is just for 091. |
Author: | bigDsmith [ Wed Jan 27, 2016 3:17 pm ] |
Post subject: | Re: Trans Jig |
Ok. I just found out its a 3 rib jig I'm getting and that's what I have is a 3 rib. Sent from my VS985 4G using Tapatalk |
Author: | reno2165 [ Wed Jan 27, 2016 6:50 pm ] |
Post subject: | Re: Trans Jig |
RaceBugg1098 wrote: 3 and 5 rib can share a jig but 091 is just for 091. Then how do you run 002 gears in an 091 case? I know you can't do it the other way around but I know guys that run 002 gear set in a 6 Rib |
Author: | RaceBugg1098 [ Mon Feb 01, 2016 10:34 am ] |
Post subject: | Re: Trans Jig |
I dont think I is the gears. I know the reverse idler is different. Its been years since I screwed around with either. I know I ended up throwing all my homemade jigs in the fire and used a "plate" style jig. I worked much much better and you had to use spacers for an 091 leading me to believe the mail shaft and pinion shaft are longer. |
Author: | Maddog [ Thu Feb 11, 2016 6:38 pm ] |
Post subject: | Re: Trans Jig |
The main case from either will work for a jig, but you would have to use the reverse idler shaft from the 3 rib to hold the reverse idler gear. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |