| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| 930 stub axles http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=12&t=17246 |
Page 1 of 1 |
| Author: | Travis [ Mon Aug 04, 2014 3:10 pm ] |
| Post subject: | 930 stub axles |
changing over to 930s, wheres the best place to get good stub axles |
|
| Author: | bigDsmith [ Mon Aug 04, 2014 5:34 pm ] |
| Post subject: | Re: 930 stub axles |
http://www.precisionalloy.com/ |
|
| Author: | MadMike [ Tue Aug 05, 2014 11:20 am ] |
| Post subject: | Re: 930 stub axles |
bigDsmith wrote: http://www.precisionalloy.com/ Yeah, lots of luck with him. I've been waiting since November for parts, I keep getting "I'll be done in two weeks, I'll be done in two weeks, I'll be done in two weeks". Dave H has been waiting for stub axles and drive flanges at least that long and he sent in cores to the guy. Now in his defense he moved a bunch of equipment and did a major business reorganization, but come on, 9 months to get things rolling again. Going to try to make contact with Todd again and find out what the 'story' is this time. |
|
| Author: | bigDsmith [ Tue Aug 05, 2014 2:36 pm ] |
| Post subject: | Re: 930 stub axles |
The I understand it he sold the business and is working out of his home now. Maybe things are better???. But the stubs are good! |
|
| Author: | Travis [ Tue Aug 05, 2014 2:56 pm ] |
| Post subject: | Re: 930 stub axles |
will the empis hold up, cant seem to come up with anything else |
|
| Author: | bigDsmith [ Tue Aug 05, 2014 3:20 pm ] |
| Post subject: | Re: 930 stub axles |
NO they won't. I have only got 100 hp and I snapped mine. My tires are even smaller than most. 11.5 x30 |
|
| Author: | bige70chevy [ Tue Aug 05, 2014 4:48 pm ] |
| Post subject: | Re: 930 stub axles |
Travis wrote: will the empis hold up, cant seem to come up with anything else i know a few people running the empi stubs with goos luck...i also know diamond dave snapped the end off one with a 1776 and 3 rib....i keep a spare but hope i never have to change it unless its in my garage lol |
|
| Author: | diamonddav [ Wed Aug 06, 2014 1:11 am ] |
| Post subject: | Re: 930 stub axles |
Yea but mine were bus stubs not 930 . If that matters:-? Sent from my SGH-T679 using Tapatalk 2 |
|
| Author: | hillaholic [ Wed Aug 06, 2014 10:37 am ] |
| Post subject: | Re: 930 stub axles |
I've been running them for years. Only problems I've had are bending them on rolls like this. http://youtu.be/gYIXHrHCe2w I'm on my 3rd set and about 17 rolls. |
|
| Author: | bigDsmith [ Wed Aug 06, 2014 10:51 am ] |
| Post subject: | Re: 930 stub axles |
The truth is there are good and bad ones in every batch in every brand. My problem was it took me 11 hours to get out when my Empi broke. It just left a bad impression. But I did run them for two years before one broke. |
|
| Author: | blackbeauty [ Wed Aug 06, 2014 12:37 pm ] |
| Post subject: | Re: 930 stub axles |
Damn hillaholic that's one tough buggy |
|
| Author: | bige70chevy [ Wed Aug 06, 2014 5:49 pm ] |
| Post subject: | Re: 930 stub axles |
blackbeauty wrote: Damn hillaholic that's one tough buggy and a 10 for style points on the rolls! |
|
| Author: | Sandbar Norm [ Mon Aug 11, 2014 3:57 pm ] |
| Post subject: | Re: 930 stub axles |
http://www.thesamba.com/vw/classifieds/ ... id=1615683 |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|