WoodsBuggy.com
http://www.woodsbuggy.com/phpBB3/

Help With Finding Specific Part...
http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=12&t=16719		 Page 1 of 1
Author:  UncleJerm76 [ Wed Feb 26, 2014 11:26 am ]
Post subject:  Help With Finding Specific Part...
Hey guys, was hoping someone could help me out here. This is my front 002/091 trans mount ...or what's left of it :? I cut as much of the welds off as I could with a cutting wheel but due to the tight quarters still had to beat it off with a sledge. I've looked everywhere for another one but can't find it and want to use this design again. It's made from a single piece of 1/4" Steel and formed into several bends on a machine. It is welded to the torsion tube and those tabs at the top are for seatbelt eyelets. You can see how it was installed in the first and last pic of it on the buggy before I removed it. I know I could try a torch or just welding several new pieces into the same shape, but I'm trying to buy where I can to save me from doing more projects. Any ideas where I can get another one? This is the last part of my "moving all the trans mounts forward" project - help I want my Ecotec in!!! LOL


Sent via TapaTalk

Attachments:
File comment: how the trans mounts to it
ImageUploadedByTapatalk1393428355.661840.jpg
ImageUploadedByTapatalk1393428355.661840.jpg [ 145.2 KiB | Viewed 1866 times ]
File comment: another angle of the mangled mess
ImageUploadedByTapatalk1393428339.944892.jpg
ImageUploadedByTapatalk1393428339.944892.jpg [ 127.55 KiB | Viewed 1866 times ]
File comment: mounted in buggy before I mangled it
ImageUploadedByTapatalk1393428307.279998.jpg
ImageUploadedByTapatalk1393428307.279998.jpg [ 231.33 KiB | Viewed 1866 times ]
Author:  BAJABUGNUT [ Wed Feb 26, 2014 2:24 pm ]
Post subject:  Re: Help With Finding Specific Part...
Unclejerm, u have probably figured out that it was a one off piece, do a cardboard cut out of one then make it, looks like a nice strong piece.
Author:  UncleJerm76 [ Wed Feb 26, 2014 2:32 pm ]
Post subject:  Help With Finding Specific Part...
BAJABUGNUT wrote:
Unclejerm, u have probably figured out that it was a one off piece, do a cardboard cut out of one then make it, looks like a nice strong piece.


Yeah, I can fab one up but this is a last ditch effort - I was hoping one these guys that been around for a while will say "yeah when I was a kid we got those off a old jeep" lol


Sent via TapaTalk
Author:  UncleJerm76 [ Wed Feb 26, 2014 2:35 pm ]
Post subject:  Help With Finding Specific Part...
One more view... This is from the shifter looking back at trans mount. Just to give another view of the mounting location. You can see I still have the seatbelt eyelets in..


Sent via TapaTalk

Attachments:
ImageUploadedByTapatalk1393439668.106806.jpg
ImageUploadedByTapatalk1393439668.106806.jpg [ 127.05 KiB | Viewed 1830 times ]
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/