| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| 002 3-rib case nut specs http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=12&t=16691 |
Page 1 of 1 |
| Author: | UncleJerm76 [ Tue Feb 18, 2014 12:15 pm ] |
| Post subject: | 002 3-rib case nut specs |
I'm looking for tq specs for the 002 case nuts. I'm replacing all the nuts and want to make sure I tq the new ones down to the correct spec. I can't this info anywhere - anyone got any ideas or can help with that info? Sent via TapaTalk |
|
| Author: | Roy [ Tue Feb 18, 2014 11:35 pm ] |
| Post subject: | Re: 002 3-rib case nut specs |
I always torque the 8x1.25 nuts to 18-20 foot pounds. The smaller ones on the nose cone I do not torque, just tighten with care. If I had to guess on them, it would prob. be about 9-11. Hope this helps some. |
|
| Author: | UncleJerm76 [ Wed Feb 19, 2014 7:38 am ] |
| Post subject: | Re: 002 3-rib case nut specs |
Thanks Sent via TapaTalk |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|