It means put them together at exactly 12:00pm.
just kidding. It means lining the two cv's up on the axle. Ill post up a link when i get home. dont know how to do it on my phone.
| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| 3 rib trans http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=12&t=15684 |
Page 1 of 1 |
| Author: | newbie26 [ Mon Jul 15, 2013 11:57 am ] |
| Post subject: | 3 rib trans |
I'm new to the buggy world. Can I use type 2 cv |
|
| Author: | hpfreak [ Mon Jul 15, 2013 5:27 pm ] |
| Post subject: | Re: 3 rib trans |
yes that's the type it should take. |
|
| Author: | bige70chevy [ Mon Jul 15, 2013 6:24 pm ] |
| Post subject: | Re: 3 rib trans |
if you are replacing cv joints you may want to have them counterbored on the clip side....also use a high quality cv grease and clock them clock them when you put the new ones in...make sure boots are in good shape as well |
|
| Author: | newbie26 [ Tue Jul 16, 2013 6:32 am ] |
| Post subject: | Re: 3 rib trans |
I have a axle already made up from previous owner. I have to replace the boot on the trans side |
|
| Author: | newbie26 [ Tue Jul 16, 2013 6:34 am ] |
| Post subject: | Re: 3 rib trans |
What do u mean by clock them |
|
| Author: | hpfreak [ Tue Jul 16, 2013 2:00 pm ] |
| Post subject: | Re: 3 rib trans |
It means put them together at exactly 12:00pm. just kidding. It means lining the two cv's up on the axle. Ill post up a link when i get home. dont know how to do it on my phone.
|
|
| Author: | hillaholic [ Tue Jul 16, 2013 10:26 pm ] |
| Post subject: | Re: 3 rib trans |
CV clocking. http://www.outfrontmotorsports.com/cv_assembly.htm Posted using the WoodsBuggy Mobile App |
|
| Author: | newbie26 [ Tue Jul 23, 2013 8:33 am ] |
| Post subject: | Re: 3 rib trans |
Also what master cylinder size should I use for clutch pedal. Posted using the WoodsBuggy Mobile App |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|