| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| 6 rib built for a 2276?? http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=12&t=11975 |
Page 1 of 1 |
| Author: | JeffClay [ Wed Jul 06, 2011 7:05 pm ] |
| Post subject: | 6 rib built for a 2276?? |
my motor is pretty peppy for a 2276, but I was thinking about playing around with the transmission to see what more pep i could get out of it for climbing.... It is currently a stock 6 rib with a superdiff. Any suggestions? Taller first and closer 2nd? maybe a r&p? Going in half ways blind, thanks for the input.... |
|
| Author: | kevin f [ Wed Jul 06, 2011 7:08 pm ] |
| Post subject: | Re: 6 rib built for a 2276?? |
It all depends on how much $ you want to spend. Me personaly, im thinking of just going with a taller 1st gear with the stock 4.57 ring and pinion. |
|
| Author: | Maddog [ Wed Jul 06, 2011 9:15 pm ] |
| Post subject: | Re: 6 rib built for a 2276?? |
Aftermarket 2nd 2.48 with 5.42 r&p engine turns 13.44 per 1 tire rotation. Stock 1st 3.78 with 4.57 engine turns 17.27 turns per 1 tire rotation. Stock 1st with 4.86 r&p turns 18.37 turns per 1 tire rotation. Stock 2nd with 4.86 turns 10.11 turns per 1 tire rotation. So, my opinion is stay stock unless you want to build a 2nd gear 5.42 with aftermarket 1&2 which will cost near $1600 in parts alone. I hope my math is correct, I've had a few tonite. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|