| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| 3 Rib question http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=12&t=11503 |
Page 1 of 1 |
| Author: | scoutpilot [ Thu Mar 31, 2011 12:55 pm ] |
| Post subject: | 3 Rib question |
Currently I am running a Beeline Cobra 2 seat with a 3 rib/ 1600 DP combination and was thinking of increasing my engine, but don't want to destroy my transmission with too much power. What power range can the 3 rib transmission handle and what displacment would be a good combination for my transmission? |
|
| Author: | Russ-the-Buss [ Thu Mar 31, 2011 1:33 pm ] |
| Post subject: | Re: 3 Rib question |
Im running a 2276 and a 3rib...have had no problems...but I am currently upgrading to a 6 rib w/ super diff...3ribs are great..just low geared...A 3rib should do you just fine...just my opinion. |
|
| Author: | RaceBugg1098 [ Thu Mar 31, 2011 2:23 pm ] |
| Post subject: | Re: 3 Rib question |
You can break a 3 rib with a 1600 and a heavy foot, and you could run a 2500 with a 3 rib for 10 years with out breaking it if your easy on it. Honestly I broke more transmissions with a 1915 than I did with a 2332. With a 1915 i was higher in the revs, and with the 2332 I stayed low and easy with the revs. It really comes down to how you drive. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|