I am ready to upgrad my turning brakes. I have dual handle Jamar,,,, I also have a rebuildable set of dual handle 5/8. I have rear disc brakes with Corrolla calipers. What do yall have,
and what do yall recommend?
| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| cutting brakes question http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=10&t=6332 |
Page 1 of 1 |
| Author: | Firebug [ Tue Apr 14, 2009 8:44 am ] |
| Post subject: | cutting brakes question |
I am ready to upgrad my turning brakes. I have dual handle Jamar,,,, I also have a rebuildable set of dual handle 5/8. I have rear disc brakes with Corrolla calipers. What do yall have, and what do yall recommend?
|
|
| Author: | khaney01 [ Tue Apr 14, 2009 9:30 am ] |
| Post subject: | Re: cutting brakes question |
I've got dual handle CNC brakes with Nissan Sentra front calipers (early 80's model). They work great. 
|
|
| Author: | kybuggy1 [ Tue Apr 14, 2009 9:51 am ] |
| Post subject: | Re: cutting brakes question |
CNC single w / wilwood knockoffs |
|
| Author: | chris38375 [ Tue Apr 14, 2009 11:03 am ] |
| Post subject: | Re: cutting brakes question |
get a neal or cnc,the biggest bore they make |
|
| Author: | Firebug [ Tue Apr 14, 2009 3:01 pm ] |
| Post subject: | Re: cutting brakes question |
What about this one? https://www.appletreeauto.com/cutting-b ... r-429.html |
|
| Author: | khaney01 [ Tue Apr 14, 2009 3:31 pm ] |
| Post subject: | Re: cutting brakes question |
Firebug wrote: What about this one? https://www.appletreeauto.com/cutting-b ... r-429.html Looks just like a CNC to me. |
|
| Author: | chris38375 [ Tue Apr 14, 2009 4:10 pm ] |
| Post subject: | Re: cutting brakes question |
they have one jus like that,that has a bleeder valve on top,get that one |
|
| Author: | Firebug [ Tue Apr 14, 2009 5:15 pm ] |
| Post subject: | Re: cutting brakes question |
Hey advertisers,,,do any of yall have this with the bleeder on top? |
|
| Author: | chris38375 [ Tue Apr 14, 2009 5:20 pm ] |
| Post subject: | Re: cutting brakes question |
tim should have it |
|
| Author: | Stevo [ Tue Apr 14, 2009 6:22 pm ] |
| Post subject: | Re: cutting brakes question |
Go with cnc, that one from appletree looks like empi. You might get a year out of it if your lucky. |
|
| Author: | Kyle [ Tue Apr 14, 2009 6:41 pm ] |
| Post subject: | Re: cutting brakes question |
Turboblue has CNC, I know duals are 119.00 singles probably the same price or less. Go with CNC. |
|
| Author: | kybuggy1 [ Tue Apr 14, 2009 7:38 pm ] |
| Post subject: | Re: cutting brakes question |
I agree. I bought three of those cheaper ones at once for three different buggies. Only one of them was good. The other two went back. One exchanged, the other replaced with CNC. I did get a good one on the exchange, but not worth the time or trouble for the savings, IMO. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|