It is currently Sat Apr 27, 2024 6:28 pm

View unanswered posts | View active topics


Board index » Tech and Fab » Brakes and Steering

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 
  Print view Previous topic | Next topic 
Author Message
nickschlemer
 Post subject: AN fitting Quetions
PostPosted: Sun Aug 03, 2008 12:06 am 
Offline

Joined: Mon Jan 28, 2008 2:25 am
Posts: 514
Location: Illinois
Hello everyone,
Im trying to figure out the fittings i need for my brake lines. I bought all my hose and they all end with female -3 ends. So my question is what size hole is coming out of the CNC brake pedal master cylinder also the same with the turning brake and clutch. The fittings i need are double male sided with obviously -3 on one side and a american fitting on the other. Does anyone no these fittings.. Also i have to do the same thing on my front and rear calipers inlets My front breaks are Pro-am and my rear is Gear-one does anyone know what size these holes are??
CNC = ? to -3
Gear-One calipers= ? to -3
Pro-am caliper= ? to -3

Hopefully this makes sense and someone had the same problem and can just tell me what size holes are in all these products..
Thanks always
Nick

_________________
Bye Bye Buggy, I'll always miss you and never forget you, your going to a better place now.
Top
 Profile  
 
Stevo
 Post subject: Re: AN fitting Quetions
PostPosted: Sun Aug 03, 2008 1:53 pm 
Offline
WB Contributor
User avatar

Joined: Tue Jun 26, 2007 9:17 am
Posts: 1461
Location: Harmony Pa Wellsville rocks!!
The cnc stuff is 1/8th inch npt thread not sure on rest

_________________
"YOU CAN MAKE THINGS HAPPEN, WATCH THINGS HAPPEN OR WONDER WHAT THE F$$K HAPPEND...WE'RE MAKING THINGS HAPPEN" The strong words of Captain Phil! Rest in peice!
Top
 Profile  
 
Bad Influence
 Post subject: Re: AN fitting Quetions
PostPosted: Sun Aug 03, 2008 8:26 pm 
Offline
WB Videographer and BOTM winner
User avatar

Joined: Wed Jun 27, 2007 11:55 am
Posts: 572
Location: Georgetown, KY
Piping brakes was a big learning curve for me. I had part metric fittings and part npt fittings. Several trips to autozone. :( and alot of head scratchin. Good Luck, I'm sure you'll get it figured out.

_________________
Bryan
Top
 Profile  
 
nickschlemer
 Post subject: Re: AN fitting Quetions
PostPosted: Sun Aug 03, 2008 10:09 pm 
Offline

Joined: Mon Jan 28, 2008 2:25 am
Posts: 514
Location: Illinois
Hey Guys,
Thanks forr the help looks like everything i have is 1/8 NPT and everything i bought is AN-3. But i got it all figured out. Im guessing the hole on my slave cylinder is 1/8NPT aswell..

_________________
Bye Bye Buggy, I'll always miss you and never forget you, your going to a better place now.
Top
 Profile  
 
Odyknuck
 Post subject: Re: AN fitting Quetions
PostPosted: Mon Aug 04, 2008 12:47 pm 
Offline
BOTM Winner
User avatar

Joined: Mon Apr 30, 2007 3:35 pm
Posts: 3097
Location: Rome Ohio
All of the aftermarket stuff is 1/8" NPT that I know of.

_________________
Water cooled Dry Sumped Subaru Powered Turbo Charged Fuel Injected 2500CC Tank. Oh Rah! He who dies with the most Toys not only wins, He also wears them out!
Top
 Profile  
 
nickschlemer
 Post subject: Re: AN fitting Quetions
PostPosted: Mon Aug 04, 2008 8:57 pm 
Offline

Joined: Mon Jan 28, 2008 2:25 am
Posts: 514
Location: Illinois
All my aftermarket stuff is. thanks for the help guys..

_________________
Bye Bye Buggy, I'll always miss you and never forget you, your going to a better place now.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 

Board index » Tech and Fab » Brakes and Steering

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 27 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group