WoodsBuggy.com
http://www.woodsbuggy.com/phpBB3/

Bearings and seals for combo spindles
http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=10&t=18044
Page 1 of 1

Author:  Dave Winterburn [ Wed Sep 27, 2017 4:34 pm ]
Post subject:  Bearings and seals for combo spindles

I know this has been asked before, I looked first. But don't know if Latest (junk) rage measures the same as EMPI (junk) After braking spindles in both June and July while running obstacle course events, I bought these spindles. Spindle diameters are outer 1.00", inner 1.25" and seal 1.75. I'm still running early drums (64) king and link. ( front brakes are about the only things that are still stock) I think the dimentions are 52mm for the outer, and 60mm for the inner and seal. I need numbers and brand for the cross over bearings, or switch to rotors that I can find bearings to cross over. Thank's in advance

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/