WoodsBuggy.com
http://www.woodsbuggy.com/phpBB3/

King pin issues
http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=10&t=18013
Page 1 of 1

Author:  nate3923 [ Wed Nov 02, 2016 6:28 am ]
Post subject:  King pin issues

So this weekend I broke my king pin. I was wondering what everyone's opinion is on what I should do. I have drop spindles but I was wondering if I should just repair them with a new kingpin or replace it all (spindle,kingpin,knuckle) so this won't happen again. Now if I replace it I'll go with non dropped kit due to the fact that my set is bowed out.

Author:  RaceBugg1098 [ Wed Nov 02, 2016 11:01 am ]
Post subject:  Re: King pin issues

I would just replace the pin unless you want to spend some $$. how much of a drop/lift do your spindles have? is this the first time you have broke a pin?

Author:  nate3923 [ Thu Nov 03, 2016 3:15 am ]
Post subject:  Re: King pin issues

Not to sure and yes first time I have broke one. A friend of mine found me some king pins and bushings for free so I'm going to try and replace them

Author:  RaceBugg1098 [ Thu Nov 03, 2016 11:26 am ]
Post subject:  Re: King pin issues

if you press new bushings in, you will have to ream them. if the new pin isn't too sloppy, leave the bushings alone.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/