WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
914 rotor http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=10&t=16206 |
Page 1 of 1 |
Author: | Psycho Alpha [ Thu Oct 24, 2013 4:38 pm ] |
Post subject: | 914 rotor |
Does anyone happen to know it I.D. Of a 914 rotor? Need to turn down some drums. Thanks Posted using the WoodsBuggy Mobile App |
Author: | MadMike [ Thu Oct 24, 2013 5:12 pm ] |
Post subject: | Re: 914 rotor |
6 1/8" should be a nice fit, nothing bigger. |
Author: | Psycho Alpha [ Thu Oct 24, 2013 6:46 pm ] |
Post subject: | Re: 914 rotor |
Thanks Mike! My buddy has them at work to machine and I did pick up rotor yet. I told him to start with a smaller piece of metal but he didn't....lol http://youtu.be/EH6mjguziWw That's what he is usually doing and I ask him to make 1" long x1.250" spacers- Posted using the WoodsBuggy Mobile App |
Author: | MadMike [ Thu Oct 24, 2013 6:57 pm ] |
Post subject: | Re: 914 rotor |
That is a medium size lathe where I use to work. I ran one that was eight feet from the top of the carriage to the center of the chuck. When you work with stuff that size, anything under 2 inch is too small to work with without breaking it. |
Author: | giveitagallon [ Thu Oct 24, 2013 6:59 pm ] |
Post subject: | Re: 914 rotor |
Lol !!!!! |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |