| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| weld on caliper mounts http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=10&t=15408 |
Page 1 of 1 |
| Author: | chadriley 5 [ Tue May 14, 2013 12:41 am ] |
| Post subject: | weld on caliper mounts |
i have changed to a set of 3x3 boxed trailing arms and my caliper mounts will no longer bolt up to the axle flange.so i ordered some weld on caliper mounts.what do i do about shimming the bearing cap the thickness of the bolt on mount?should i just cut the mount down to just the flat part or what? |
|
| Author: | Odyknuck [ Tue May 14, 2013 8:02 am ] |
| Post subject: | Re: weld on caliper mounts |
Yep, otherwise you will snap the lugs off the cap when you tighten the bolts. |
|
| Author: | chadriley 5 [ Wed May 22, 2013 10:40 pm ] |
| Post subject: | Re: weld on caliper mounts |
anybody know of a good exploded view of the rear hub assembly.i ordered new seals and wanna make sure it all goes back together right |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|