maybe this picture will work
| Attachments: |
|
lilbrake.jpg [ 8.75 KiB | Viewed 3616 times ] |
| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| name this caliper please http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=10&t=15404 |
Page 1 of 1 |
| Author: | superkingd [ Mon May 13, 2013 9:53 pm ] |
| Post subject: | name this caliper please |
i have a brake hanging up. stock pedals cnc cutters, brakes hang up until you crack the line loose or just wait and it stars to loosen after 5 or 10 minutes I am going to replace master cyl but I already had a bleeder break and a line is dry rotted so I need to figure out what these are. thanks for help also what stock master cyl has one top port for a reservoir? thanks guys |
|
| Author: | superkingd [ Mon May 13, 2013 9:57 pm ] | ||
| Post subject: | Re: name this caliper please | ||
maybe this picture will work
|
|||
| Author: | Red Barron [ Mon May 13, 2013 10:12 pm ] |
| Post subject: | Re: name this caliper please |
Sounds like a caliper piston hanging from some corrosion between the piston and bore |
|
| Author: | riverar321 [ Mon May 13, 2013 10:27 pm ] |
| Post subject: | Re: name this caliper please |
It is likely just the dry rotted rubber line that is causing the problem. When they get old they collapse and restrict the flow of fluid. The reason your brake hangs is because it take a few minutes for the fluid to release the brakes due to the bad rubber hose. Again, this is the same reason that craking the bleader/hose releives the pressure. |
|
| Author: | hpfreak [ Mon May 13, 2013 10:45 pm ] |
| Post subject: | Re: name this caliper please |
riverar321 wrote: It is likely just the dry rotted rubber line that is causing the problem. When they get old they collapse and restrict the flow of fluid. The reason your brake hangs is because it take a few minutes for the fluid to release the brakes due to the bad rubber hose. Again, this is the same reason that craking the bleader/hose releives the pressure. X2 |
|
| Author: | superkingd [ Mon May 13, 2013 10:56 pm ] |
| Post subject: | Re: name this caliper please |
Thanks. I figured new hoses and calipers, I just have to figure out what caliper I have. Looking at AutoZone website they aren't the Nissan Sentra caliper that is popular. Might have to go to a parts store and do some searching. |
|
| Author: | riverar321 [ Mon May 13, 2013 11:35 pm ] |
| Post subject: | Re: name this caliper please |
Post a larger pic if you can. |
|
| Author: | superkingd [ Tue May 14, 2013 12:58 am ] |
| Post subject: | Re: name this caliper please |
I tried but it said it was to many pixels. So I shrunk it. I will try again. I work nights so I can text it to anyone or e mail it. Thanks again for your time. 765 603 8048 just let me know and I can send it and I do appreciate it |
|
| Author: | superkingd [ Tue May 14, 2013 3:59 am ] |
| Post subject: | Re: name this caliper please |
Looks like maybe a 84 dodge omni. Will find out later |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|