If I understood what i've read on here, I need to find a set of type 3 drive hubs and cut down to fit inside the 72-76 porsche 914 rotors, is this right? If so is there anything else i need to get or find? does anyone know where to find a set of type 3 drive hubs in north alabama? thanks ahead for the help

_________________
Of all the things I've lost, I miss my mind the most.
M
A
G
A

what you think it would cost to ship to alabama? - zip is 35674

Somewhere around $14.00

_________________
Of all the things I've lost, I miss my mind the most.
M
A
G
A

maybe somebody can explain what the difference is between a type 1 and type 3 hub/drum?

my 1st buggy had Porsche rotors and type 1 hubs that had the drum turned off of it. I had one strip the splines out when the nut got loose and I just bolted on a whole type 1 hub/drum and put the buggy on jack stands, then cranked it up in gear an let it idle, then I used a cut off wheel on a side grinder to cut just outside the studs/lugs and when done it looked like it had been machined off and the Porsche rotor went right back on just like the old one

_________________
Just Stand On It!!!!

Chris

Sweet tech tip.

_________________
LET ER EAT !!! If you aint first, your LAST.!!.

so either type 1 or 3 hubs will work as long as they're cut down to fit inside the porsche rotors? I've got a set of type 1's that i can cut down. all the new rotors I've found so far ranges from 75.00 to 85.00 ea. is this about right or does someone know of a cheaper place to buy them. thanks for the help

Well thanks a bunch.

_________________
Of all the things I've lost, I miss my mind the most.
M
A
G
A

or sometimes it is easier just to buy them!!!

if it was easy, what fun would that be? ,, if i could find a good one piece that i could afford besides empi, that would be great, anybody got any ideals? money done got tight building a new buggy.. thanks alot guys ahead of time

not sure what you talking about but I wasn't trying to knock a sale if that's what you mean, if so im sorry but if that was the case I would have just called him seeing as I know him and his brother is a friend of mine and only live about 30 min away

was just and still wandering what/why some folks say use a type hub and what difference was as ive never had any dealings with any type 3 stuff

_________________
Just Stand On It!!!!

Chris

thanks for the help chris, didnt mean to cause trouble, just needing help since i'm trying to learn, i'm new to building buggies. thanks for all the help from everyone