Where can I get a rebuild kit for a bugpack single arm cutter?
Ive looked everywhere it seems

Might compare it to a Jamar. It seems like I read somewhere that they were basically the same. I'm pretty sure the Bugpack kits are discontinued now.

It might be easier to just buy a new cutting brake. They aren't terribly expensive and then you will easily find parts for it.

_________________
"Obstacles are those frightful things you see when you take your eyes off your goal." -Henry Ford

Best of luck and check the bore if it is pitted at all junk it and elect for a cnc.

_________________
Water Cooled Consortium, Chairman of the Build (Former AC purist)

haha, Yea im gonna try to find a cnc cutter but I doubt i can afford one.

It should be less than $120.00. I think I paid $95.00 for mine about 4 years ago.

_________________
Water Cooled Consortium, Chairman of the Build (Former AC purist)

try southern buggies or drews off road

_________________
Hey,can you hand me those zip ties and that roll of duct tape?!

Have you taken it apart yet? If it just needs a new cup seal you can get one at NAPA, should be the same seal used in wheel cylinders.
Good Luck
Kenric

I took it apart and the first o ring was wore flat so I tried to find one and couldnt so I took a bit larger seal and cut it at a angle and glued it together seems to kinda work it doesnt leak out of the front anymore I just have to bleed it out I still want a different set.