| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| cutting brake ? http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=10&t=13653 |
Page 1 of 1 |
| Author: | tony [ Sun May 13, 2012 2:40 pm ] |
| Post subject: | cutting brake ? |
I need a new cuttin brake mine is shot is an oneil one and i was wonderin if the $89 empi brake is any count and if not hows the jamar hold up |
|
| Author: | kevin f [ Sun May 13, 2012 3:31 pm ] |
| Post subject: | Re: cutting brake ? |
tony wrote: I need a new cuttin brake mine is shot is an oneil one and i was wonderin if the $89 empi brake is any count and if not hows the jamar hold up spend the money and buy a CNC. |
|
| Author: | MickeyMouse [ Sun May 13, 2012 7:32 pm ] |
| Post subject: | Re: cutting brake ? |
Most people on here try to stay away from EMPI.. You get what you pay for and breaking down on the trail sucks... |
|
| Author: | tony [ Sun May 13, 2012 7:45 pm ] |
| Post subject: | Re: cutting brake ? |
ok thx so stay away from the jamar to |
|
| Author: | hillaholic [ Sun May 13, 2012 8:04 pm ] |
| Post subject: | Re: cutting brake ? |
I would buy a cnc. I bought a Neal and it lasted 2 days before it started leaking. Also had a jammer only lasted 1 season before it started leaking. The cnc that's in my buggy don't even know how old it is and I've had the buggy for 5yrs. Only had to replace the o rings in it after the first year I had it, so going on 4yrs now after putting $1.00 worth of o rings in it. Stay away of anything EMPI if you can. |
|
| Author: | tony [ Sun May 13, 2012 9:00 pm ] |
| Post subject: | Re: cutting brake ? |
ok thx so i guess cnc is wat i will get thx for the help |
|
| Author: | jayrod [ Sun May 13, 2012 9:42 pm ] |
| Post subject: | Re: cutting brake ? |
Ive gotta Neal dual handle. going on 5yrs old, Never had a problem out of it. |
|
| Author: | JeffClay [ Tue Sep 18, 2012 3:09 pm ] |
| Post subject: | Re: cutting brake ? |
I just got an EMPI single handle because i refuse to run the dual handles in the single seater, and it's all they had. It was $95, we will see how it works. It appears to be exactly the same as a CNC, but who knows where they are made, probably the same chinese factory. IDK where CNC is made. My two seater has a billet Neal in it... |
|
| Author: | fortydegnorth [ Tue Sep 18, 2012 3:50 pm ] |
| Post subject: | Re: cutting brake ? |
I have a CNC cutting brake and it's perfect, but my Latest Rage master cylinders on the pedals were junk. Never used, but filled, bled and sat for 5 years and they leaked like shovel head harley. I'll either buy CNC or Wilwood from now on. I think a lot of Latest Rage stuff is Empi or very close to it. |
|
| Author: | bige70chevy [ Tue Sep 18, 2012 5:37 pm ] |
| Post subject: | Re: cutting brake ? |
have cnc good to go for last 4 years ive had buggy and they were on it when i got it |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|