Should work.I know there is a few good post on here from nitromudder and kybuggy1 on how to build one out of a power sprayer for about the same cash and they work really well.Chad
| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| Opinions http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=10&t=13542 |
Page 1 of 1 |
| Author: | kernal1984 [ Fri Apr 20, 2012 1:05 pm ] |
| Post subject: | Opinions |
Gonna replace my master cylinder and move my cutters and after reading some bleeding stories i think ive decided on this http://www.harborfreight.com/brake-fluid-bleeder-92924.html Will it get the job done? |
|
| Author: | gasman [ Fri Apr 20, 2012 1:30 pm ] |
| Post subject: | Re: Opinions |
Should work.I know there is a few good post on here from nitromudder and kybuggy1 on how to build one out of a power sprayer for about the same cash and they work really well.Chad
|
|
| Author: | NRIbuggys [ Fri Apr 20, 2012 1:31 pm ] |
| Post subject: | Re: Opinions |
I got one made from a propane tank |
|
| Author: | gasman [ Fri Apr 20, 2012 1:33 pm ] |
| Post subject: | Re: Opinions |
Read this. Chad http://www.woodsbuggy.com/index.php?opt ... er+bleeder |
|
| Author: | nitro_mudder [ Fri Apr 20, 2012 6:50 pm ] |
| Post subject: | Re: Opinions |
The only downside to the Harbor Freight one is you need an air compressor. Ten pumps or so on my bug sprayer one does most of the job. Does not require a ton of pumping. And I take it with me on every ride! Oh ya, also works the same on my clutch. |
|
| Author: | MickeyMouse [ Fri Apr 20, 2012 8:53 pm ] |
| Post subject: | Re: Opinions |
kernal1984 wrote: Gonna replace my master cylinder and move my cutters and after reading some bleeding stories i think ive decided on this http://www.harborfreight.com/brake-fluid-bleeder-92924.html Will it get the job done? I am a big fan of the Bug Sprayer Bleeder but for $25 bucks it is worth a try.. Let us know how if works. |
|
| Author: | 2800passat [ Fri Apr 20, 2012 9:06 pm ] |
| Post subject: | Re: Opinions |
I had a T in my lt and rt brake line with a hose going up verticle and capped on both sides. After I would get thru riding all day I'd pop the cap (plug) and sure enough! there would be an inch or 2 of air and I would pour some brake fluid out of the bottle in there and put the cap back on and I would have some Awesome brakes! That T would catch migrating air bubbles thru out the day that you just could not normally reach unless you did some serious twisting riding all day.I loved it. Get a brass T off an ole beetle, with a rubber brake line going vertical. |
|
| Author: | nitro_mudder [ Fri Apr 20, 2012 9:52 pm ] |
| Post subject: | Re: Opinions |
DD I talked about doing that last year with Marty, lol. Great minds think alike, and apperently so do some of lesser thinkers I was going to put a ball valve on it at the top so i could easily force the air out and close it.
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|